Specifics of ITO properties deposited on cerium-doped glass for space-grade solar cells

Danil D. Gren; Lev O. Luchnikov; Dmitri Yu. Dorofeev; Prokhor A. Alekseev; Ildar R. Sayarov; Alexey R. Tameev; Mikhail S. Dunaevskiy; Vladislav Kalinichenko; Vladimir Ivanov; Danila S. Saranin; Eugene I. Terukov

arXiv · 2507.20011

Specifics of ITO properties deposited on cerium-doped glass for space-grade solar cells

Danil D. Gren·Lev O. Luchnikov·Dmitri Yu. Dorofeev·Prokhor A. Alekseev·Ildar R. Sayarov·Alexey R. Tameev·Mikhail S. Dunaevskiy·Vladislav Kalinichenko·Vladimir Ivanov·Danila S. Saranin·Eugene I. Terukov

View original source ↗Read source document ↗Export metadata ↓

Abstract

Ce-doped glass is a well-established solution for ultraviolet and ionizing radiation shielding of solar cells in space. Traditionally, Ce-glass protected Si or III-V based devices as an overlaying cap. However, for emerging photovoltaics such as halide perovskites, thin Ce-glass coated with transparent conductive layers could serve as a lightweight carrier with an electrode. While indium-tin oxide (ITO) is widely used in solar cells for charge collection, its optical, structural, and electrical properties depend on the substrate quality. In this work, we demonstrated significant differences in properties of ITO deposited on Ce-glass (100 micron thick) compared to standard soda lime glass. ITO on Ce-glass exhibited pronounced compressive strain because of higher oxygen vacancy concentrations, reduced transparency and charge carrier concentration (10^19 cm-3) resulting from altered stoichiometry. Electrical analysis showed increased Hall mobility (66 cm2V-1s-1) but decreased conductivity due to excess tin incorporation. These specific ITO features originated from inelastic collisions with the substrate during deposition. Variations in wettability and surface potential underscore substrate-induced differences critical for developing optimized ITO coatings for space-grade photovoltaics.

Explore related subjects

cond-mat.mtrl-sci cond-mat.mes-hall

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Danil D. Gren, Lev O. Luchnikov, Dmitri Yu. Dorofeev, Prokhor A. Alekseev, Ildar R. Sayarov, Alexey R. Tameev, Mikhail S. Dunaevskiy, Vladislav Kalinichenko, Vladimir Ivanov, Danila S. Saranin, Eugene I. Terukov. 2025-07-26. Specifics of ITO properties deposited on cerium-doped glass for space-grade solar cells. https://arxiv.org/abs/2507.20011

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Structure and dynamics of the negative thermal expansion material Cd(CN)$_2$ under hydrostatic pressure

We use a combination of variable-temperature / variable-pressure neutron powder diffraction, variable-pressure inelastic neutron scattering, and quantum chemical calculations to interrogate the behaviour of the negative thermal expansion (NTE) material $^{114}$Cd(CN)$_2$ under hydrostatic pressure. We determine the equation of state of the ambient-pressure phase, and discover the so-called `warm hardening' effect whereby the material becomes elastically stiffer as it is heated. We also identify a number of high-pressure phases, and map out the phase behaviour of Cd(CN)$_2$ over the range $0\leq p\leq0.5$\,GPa, $100\leq T\leq300$\,K. As expected for an NTE material, the low-energy phonon frequencies are found to soften under pressure, and we determine an effective Gr{ü}neisen parameter for these modes. Finally, we show that the elastic behaviour of Cd(CN)$_2$ is sensitive to the local Cd coordination environment, which suggests an interplay between short- (phononic) and long-timescale (cyanide flips) fluctuations in Cd(CN)$_2$.

cond-mat.mtrl-sci↗

arXiv2026

Unconventional Magnetism, Sliding Ferroelectricity, and Magneto-Optical Kerr Effect in Multiferroic Bilayers

Antiferromagnetic (AFM) materials provide a platform to couple altermagnetic (AM) spin-splitting with the magneto-optical Kerr effect (MOKE), offering potential for next-generation quantum technologies. In this work, first-principles calculations, symmetry analysis, and kp modeling are employed to show that interlayer sliding in AFM multiferroic bilayers enables control of electronic, magnetic, and magneto-optical properties. This study reveals an intriguing dimension-driven AM crossover: the 2D paraelectric (PE) bilayer exhibits spin-degenerate bands protected by the [C2||Mc] spin-space symmetry, whereas the 3D counterpart manifests AM spin-splitting along kz \neq 0 paths. Furthermore, interlayer sliding breaks this Mc symmetry and stabilizes a ferroelectric (FE) state with compensated ferrimagnetism, where the Zeeman-like field is responsible for the nonrelativistic spin-splitting. In the FE phase, spin-orbit coupling (SOC) lifts accidental degeneracies and produces `alternating' spin-polarized bands through the interplay of Zeeman and Rashba effects. Crucially, spin polarization, ferrovalley polarization, and the Kerr angle can all be reversed by switching either sliding ferroelectricity or the Neel vector. Our findings reveal the rich coupling among electronic, magnetic, and optical orders in sliding multiferroics, illustrating new prospects for ultralow-power spintronic and optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2026

Lead-free piezoelectric perovskites for arterial-pulse e-skin: from configurational complexity to equivariant machine-learning potentials

Continuous, non-invasive monitoring of the arterial pulse is a clinical priority for cardiovascular disease, the leading cause of global mortality. Flexible piezoelectric electronic skins can transduce the 1-10 kPa pressure wave into a self-powered voltage, but the best-performing piezoceramics are lead-based, and their toxicity is incompatible with skin contact and with tightening RoHS/REACH regulation. Among lead-free alternatives, the BaTiO$3$-based solid solution BZT-BCT reaches $d{33} \approx 620$ pC/N near its tricritical morphotropic phase boundary, rivalling soft PZT while remaining biocompatible. Exploiting this in a wearable confronts a sensitivity-flexibility paradox and three computational walls: the combinatorial explosion of atomic configurations in a disordered solid solution, the band-gap error of affordable density-functional approximations, which corrupts leakage and insulation estimates, and the 0 K nature of standard calculations against a 310 K operating temperature. We review lead-free piezoelectrics, morphotropic-boundary physics and fabricated flexible devices, then argue that equivariant machine-learning interatomic potentials --- coupled to a tiered functional hierarchy and finite-temperature lattice dynamics --- can survey the full configurational ensemble at body temperature and close the gap to a clinically viable lead-free pulse sensor.

cond-mat.mtrl-sci↗