arXiv ScienceSearch

arXiv · 2506.10493

Spatial and temporal evolutions of blue-core helicon discharge driven by planar antenna with concentric rings

Abstract

The spatial and temporal evolutions of blue-core helicon discharge driven by a planar antenna with four concentric rings are explored on the Linear Experimental Advanced Device (LEAD). The discharge experiences distinct density jumps from E mode to H mode, W mode, and blue-core mode, when RF input power increases. This is similar to previous observations using other typical helicon antennas; however, this special antenna could drive modes of even higher levels for which the blue-core plasma column is actually hollow in radius, i.e. peaking off-axis, which was not presented before. The column shows counterclockwise rotation for blue-core mode and clockwise rotation for non-blue-core mode. The reason could be attributed to the radial electric field differenceses for both modes which reverses the rotation direction via ExB drive. Moreover, the centrifugal instability of blue-core helicon plasma is computed using a two-fluid flowing plasma model. It shows that the instability is strong for small axial wave number but becomes weak for large axial wave number. Perturbed density peaks at radius of 0.045 m, while the equilibrium density gradient peaks at radius of 0.055 m. The coincidence of their radial locations suggests that it is a resistive drift mode driven by density gradient. The blue-core mode weakens once the magnetic field or flow rate exceeds the threshold value. Increasing power further leads to a smoother plasma density gradient. The electron temperature profiles decrease with increased power, and the radial gradient of the electron temperature inside the core is smaller as the magnetic field changes. To our best knowledge, it is the first detailed characterization of blue-core helicon plasma driven by planar antenna, especially in terms of azimuthal rotation and centrifugal instability.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Chao Wang, Lei Chang, Ling-Feng Lu, Shunjiro Shinohara, Zhi-De Zeng, Ilya Zadiriev, Elena Kralkina, Zhi Li, Shi-Jie Zhang, Zi-Chen Kan, Ye Tao, Ding-Zhou Li. 2025-06-12. Spatial and temporal evolutions of blue-core helicon discharge driven by planar antenna with concentric rings. https://arxiv.org/abs/2506.10493

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Mechanism of Ionization Avalanche in Tokamak Microwave Gas Breakdown

Microwave breakdown driven by electron cyclotron (EC) waves provides a non-inductive route to plasma initiation in reactor-scale tokamaks. We introduce a three-dimensional Monte Carlo simulation that, for the first time, self-consistently treats nonlinear wave-particle interactions, atomic collisions, and guiding-center transport. The Monte Carlo simulation unveils the key role of parallel Brownian motion in the ionization avalanche mechanism. The predicted breakdown boundary is validated against KSTAR experiments. This work concludes that microwave gas breakdown will be successful under ITER-relevant conditions at a D$_2$ prefill pressure near 2 mPa with 1 MW of injected EC power.

physics.plasm-ph

Augmented reality system for visualising magnetic field topology and charged-particle trajectories in magnetic fusion plasmas

A cost-effective augmented reality (AR) system is presented for visualising three-dimensional magnetic field structures and charged-particle trajectories in magnetically confined fusion plasmas. The system presented in this study integrates an orbit-following simulation code with a marker-based AR framework using a web camera and the OpenCV library. By synchronizing the time step of the simulation with the frame rate of the camera, the trajectories are continuously updated and superimposed in real time onto the camera image. Through the interactive operation of manipulating the web camera, users can observe three-dimensional structures, such as magnetic islands, from various positions and viewing angles. Such an AR environment supports an interactive means of exploring three-dimensional spatial structures that can be difficult to interpret from two-dimensional representations alone. It also provides a common visual representation that can be shared through a display by researchers and students with diverse backgrounds in physics, engineering, and related fields. The developed system has been used in practical exercises at the JT-60SA International Fusion School, with exploratory feedback from students.

physics.plasm-ph

Sensitivity of a low-shear heliotron configuration to localised ferrite-steel perturbations

The influence of ferritic steel on low-shear stellarator/heliotron magnetic configurations is investigated for the Heliotron J device using a point dipole magnetisation model. By numerically evaluating ferritic steel plates assumed at several locations inside the Heliotron J vacuum vessel, the changes in the rotational transform and magnetic island width are shown to be sensitive to the installation location. This location sensitivity arises from the toroidal variation of poloidal mode coupling between the background nonaxisymmetric field and ferritic-steel perturbation, rather than being determined solely by the perturbation amplitude. The resulting mode coupling can enhance the resonant vacuum magnetic perturbation at specific locations. Ferritic steel plates placed on the outer side of a straight section produce the most significant changes in the magnetic topology and exhibit the highest sensitivity to violations of the $M=4$ toroidal periodicity. Additionally, we show that appropriate arrangements of passive magnetic dipoles can reduce the effective helical ripple while preserving the vacuum magnetic well depth in Heliotron J, and can induce a stellarator-asymmetric boundary perturbation in low-field experiments.

physics.plasm-ph