arXiv ScienceSearch

arXiv · 2504.14635

Positive and negative DC glow discharges: a comparative study to characterize self-organized patterns on water surface

Abstract

Self-organized patterns (SOP) in plasma discharges arise from the complex interplay of electric field, reactive species and charged particles, driven by non-linear plasma dynamics. While studies have explored SOP formation in various configurations, no systematic comparison of positive and negative DC glow discharges has been conducted to explain why SOP form exclusively when polarization is negative. This study aims to analyze SOP formation mechanisms by comparing electrical, optical and spectral properties of positive and negative DC glow discharges interacting with a grounded water surface. Key differences in gas temperature, electric field and reactive species distribution are hence identified. For positive DC glow discharges (PGD), the gas temperature remains in the 350-370 K range, while the reduced electric field remains below 100 Td across the gap. The plasma is dominated by OH and N2* species, whose excitation results from direct electron impact and energy transfer in a low-field environment. The absence of strong ionization and electric field gradients leads to a spatially homogeneous emission layer on the liquid surface, resulting in a circular uniform plasma (CUP) pattern without self-organization. In contrast, SOP emerge exclusively under negative DC glow discharges (NGD) at currents above 15 mA. These discharges present a reduced electric field, peaking at 485 Td at 1mm from the cathode pin, dropping below 100 Td in the central gap and rising to 460 Td near the water surface. There, the plasma layer still contains OH and N2* species but also N2+ ions, the latter being critical for SOP formation. SOP morphology evolves with gap size: at 7 mm, patterns transition from specks to filaments, with pattern diameter and thickness as high as 5.5 mm and 210 μm respectively. Lowering water surface tension with surfactants reduces SOP size and modifies pattern morphology.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Thierry Dufour, Elliot Ogden. 2025-04-20. Positive and negative DC glow discharges: a comparative study to characterize self-organized patterns on water surface. https://doi.org/10.1063/5.0251603

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Mechanism of Ionization Avalanche in Tokamak Microwave Gas Breakdown

Microwave breakdown driven by electron cyclotron (EC) waves provides a non-inductive route to plasma initiation in reactor-scale tokamaks. We introduce a three-dimensional Monte Carlo simulation that, for the first time, self-consistently treats nonlinear wave-particle interactions, atomic collisions, and guiding-center transport. The Monte Carlo simulation unveils the key role of parallel Brownian motion in the ionization avalanche mechanism. The predicted breakdown boundary is validated against KSTAR experiments. This work concludes that microwave gas breakdown will be successful under ITER-relevant conditions at a D$_2$ prefill pressure near 2 mPa with 1 MW of injected EC power.

physics.plasm-ph

Augmented reality system for visualising magnetic field topology and charged-particle trajectories in magnetic fusion plasmas

A cost-effective augmented reality (AR) system is presented for visualising three-dimensional magnetic field structures and charged-particle trajectories in magnetically confined fusion plasmas. The system presented in this study integrates an orbit-following simulation code with a marker-based AR framework using a web camera and the OpenCV library. By synchronizing the time step of the simulation with the frame rate of the camera, the trajectories are continuously updated and superimposed in real time onto the camera image. Through the interactive operation of manipulating the web camera, users can observe three-dimensional structures, such as magnetic islands, from various positions and viewing angles. Such an AR environment supports an interactive means of exploring three-dimensional spatial structures that can be difficult to interpret from two-dimensional representations alone. It also provides a common visual representation that can be shared through a display by researchers and students with diverse backgrounds in physics, engineering, and related fields. The developed system has been used in practical exercises at the JT-60SA International Fusion School, with exploratory feedback from students.

physics.plasm-ph

Sensitivity of a low-shear heliotron configuration to localised ferrite-steel perturbations

The influence of ferritic steel on low-shear stellarator/heliotron magnetic configurations is investigated for the Heliotron J device using a point dipole magnetisation model. By numerically evaluating ferritic steel plates assumed at several locations inside the Heliotron J vacuum vessel, the changes in the rotational transform and magnetic island width are shown to be sensitive to the installation location. This location sensitivity arises from the toroidal variation of poloidal mode coupling between the background nonaxisymmetric field and ferritic-steel perturbation, rather than being determined solely by the perturbation amplitude. The resulting mode coupling can enhance the resonant vacuum magnetic perturbation at specific locations. Ferritic steel plates placed on the outer side of a straight section produce the most significant changes in the magnetic topology and exhibit the highest sensitivity to violations of the $M=4$ toroidal periodicity. Additionally, we show that appropriate arrangements of passive magnetic dipoles can reduce the effective helical ripple while preserving the vacuum magnetic well depth in Heliotron J, and can induce a stellarator-asymmetric boundary perturbation in low-field experiments.

physics.plasm-ph