arXiv ScienceSearch

arXiv · 2504.03196

Mitigating the Impact of Electrode Shift on Classification Performance in Electromyography-Based Motion Prediction Using Sliding-Window Normalization

Abstract

Electromyography (EMG) signals are used in many applications, including prosthetic hands, assistive suits, and rehabilitation. Recent advances in motion estimation have improved performance, yet challenges remain in cross-subject generalization, electrode shift, and daily variations. When electrode shift occurs, both transfer learning and adversarial domain adaptation improve classification performance by reducing the performance gap to -1\% (eight-class scenario). However, additional data are needed for re-training in transfer learning or for training in adversarial domain adaptation. To address this issue, we investigated a sliding-window normalization (SWN) technique in a real-time prediction scenario. This method combines z-score normalization with a sliding-window approach to reduce the decline in classification performance caused by electrode shift. We validated the effectiveness of SWN using experimental data from a target trajectory tracking task involving the right arm. For three motions classification (rest, flexion, and extension of the elbow) obtained from EMG signals, our offline analysis showed that SWN reduced the differential classification accuracy to -1.0\%, representing a 6.6\% improvement compared to the case without normalization (-7.6\%). Furthermore, when SWN was combined with a strategy that uses a mixture of multiple electrode positions, classification accuracy improved by an additional 2.4\% over the baseline. These results suggest that SWN can effectively reduce the performance degradation caused by electrode shift, thereby enhancing the practicality of EMG-based motion estimation systems.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Taichi Tanaka, Isao Nambu, Yasuhiro Wada. 2025-05-07. Mitigating the Impact of Electrode Shift on Classification Performance in Electromyography-Based Motion Prediction Using Sliding-Window Normalization. https://arxiv.org/abs/2504.03196

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP

Multimodal Learning for Beamforming Using Camera, LiDAR, and Radio-Frequency Pilots

This paper proposes a multimodal learning framework that integrates camera images, LiDAR point clouds, and radio-frequency (RF) pilots to realize multi-user multiple-input single-output (MU-MISO) beamforming optimization in mixed line-of-sight (LoS) and non-line-of-sight (NLoS) environments. In LoS-dominant environments, beamforming can be designed by utilizing sensing information related to user locations. However, LoS paths cannot be guaranteed to exist for all users in realistic dynamic environments due to blockages. To characterize NLoS propagation, detailed three-dimensional (3D) information of surrounding obstacles is required. This paper integrates camera images and LiDAR points with RF pilots to capture detailed 3D geometric, object-class, and material information of users and surrounding objects. The obtained multimodal information provides useful cues for both direct LoS paths and reflected NLoS propagation, and provides rich channel-related information for beamforming design. Specifically, a bounding-box detection neural network is first used to extract two-dimensional spatial, object-class, and material information from camera images. The image-derived information then guides the selection of LiDAR points to obtain 3D geometric information of users and surrounding obstacles, and assigns object-class and material labels to the selected points. The image-guided LiDAR features, together with RF pilots, are jointly processed by a designed neural architecture to optimize the beamforming vectors. Simulation results show that the proposed method achieves a higher minimum rate than benchmarks.

eess.SP