Modulation of Charge Transport and Rectification Behavior in CsSnI3 Thin Films Through A-site Cation Engineering

Anna A. Zarudnyaya; Gleb V. Segal; Andrey P. Morozov; Lev O. Luchnikov; Sergey Yu. Yurchuk; Ivan V. Schemerov; Pavel A. Gostishchev; Danila S. Saranin

arXiv · 2503.16152

Modulation of Charge Transport and Rectification Behavior in CsSnI3 Thin Films Through A-site Cation Engineering

Anna A. Zarudnyaya·Gleb V. Segal·Andrey P. Morozov·Lev O. Luchnikov·Sergey Yu. Yurchuk·Ivan V. Schemerov·Pavel A. Gostishchev·Danila S. Saranin

View original source ↗Read source document ↗Export metadata ↓

Abstract

CsSnI3 perovskite is a promising thin-film semiconductor with high intrinsic conductivity for various device applications (thermoelectric, photovoltaics, etc.). Stoichiometric CsSnI3 owns high-density of defects and structural imperfections affecting device performance. In this work, we made an investigation on A-site cation engineering to evaluate the correlation between structural and transport parameters for effective operation in rectifying devices. Here, we analyzed CsSnI3 thin films modified with methylamine (MA), formamidine(FA), guanidine(GuA) and 5-ammonium valeric acid (AVA) cations, correlating structural parameters obtained by Rietveld refinement with their optoelectronic and diode characteristics. MA-, FA-, and GuA-substituted films exhibited low sheet resistance (450-2200 Ohm per sq). However, strain-induced lattice distortions and accumulated defects in GuA-substituted films significantly hindered effective charge collection and increased recombination losses. AVA substitution formed low-conductivity 2D interlayers, dramatically increasing resistance (105 Ohm per sq) and altering transient response characteristics, yet provided minimal reverse-switching losses (100 uW per cm2), beneficial for high-frequency applications. FA substitution emerged as optimal, balancing structural stability, conductivity, minimal defects, and superior diode properties. The obtained results highlight that targeted lattice modifications strongly influence the practical performance of rectifying p-i-n diodes based on CsSnI3.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Anna A. Zarudnyaya, Gleb V. Segal, Andrey P. Morozov, Lev O. Luchnikov, Sergey Yu. Yurchuk, Ivan V. Schemerov, Pavel A. Gostishchev, Danila S. Saranin. 2025-03-20. Modulation of Charge Transport and Rectification Behavior in CsSnI3 Thin Films Through A-site Cation Engineering. https://arxiv.org/abs/2503.16152

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Structure and dynamics of the negative thermal expansion material Cd(CN)$_2$ under hydrostatic pressure

We use a combination of variable-temperature / variable-pressure neutron powder diffraction, variable-pressure inelastic neutron scattering, and quantum chemical calculations to interrogate the behaviour of the negative thermal expansion (NTE) material $^{114}$Cd(CN)$_2$ under hydrostatic pressure. We determine the equation of state of the ambient-pressure phase, and discover the so-called `warm hardening' effect whereby the material becomes elastically stiffer as it is heated. We also identify a number of high-pressure phases, and map out the phase behaviour of Cd(CN)$_2$ over the range $0\leq p\leq0.5$\,GPa, $100\leq T\leq300$\,K. As expected for an NTE material, the low-energy phonon frequencies are found to soften under pressure, and we determine an effective Gr{ü}neisen parameter for these modes. Finally, we show that the elastic behaviour of Cd(CN)$_2$ is sensitive to the local Cd coordination environment, which suggests an interplay between short- (phononic) and long-timescale (cyanide flips) fluctuations in Cd(CN)$_2$.

cond-mat.mtrl-sci↗

arXiv2026

Unconventional Magnetism, Sliding Ferroelectricity, and Magneto-Optical Kerr Effect in Multiferroic Bilayers

Antiferromagnetic (AFM) materials provide a platform to couple altermagnetic (AM) spin-splitting with the magneto-optical Kerr effect (MOKE), offering potential for next-generation quantum technologies. In this work, first-principles calculations, symmetry analysis, and kp modeling are employed to show that interlayer sliding in AFM multiferroic bilayers enables control of electronic, magnetic, and magneto-optical properties. This study reveals an intriguing dimension-driven AM crossover: the 2D paraelectric (PE) bilayer exhibits spin-degenerate bands protected by the [C2||Mc] spin-space symmetry, whereas the 3D counterpart manifests AM spin-splitting along kz \neq 0 paths. Furthermore, interlayer sliding breaks this Mc symmetry and stabilizes a ferroelectric (FE) state with compensated ferrimagnetism, where the Zeeman-like field is responsible for the nonrelativistic spin-splitting. In the FE phase, spin-orbit coupling (SOC) lifts accidental degeneracies and produces `alternating' spin-polarized bands through the interplay of Zeeman and Rashba effects. Crucially, spin polarization, ferrovalley polarization, and the Kerr angle can all be reversed by switching either sliding ferroelectricity or the Neel vector. Our findings reveal the rich coupling among electronic, magnetic, and optical orders in sliding multiferroics, illustrating new prospects for ultralow-power spintronic and optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2026

Lead-free piezoelectric perovskites for arterial-pulse e-skin: from configurational complexity to equivariant machine-learning potentials

Continuous, non-invasive monitoring of the arterial pulse is a clinical priority for cardiovascular disease, the leading cause of global mortality. Flexible piezoelectric electronic skins can transduce the 1-10 kPa pressure wave into a self-powered voltage, but the best-performing piezoceramics are lead-based, and their toxicity is incompatible with skin contact and with tightening RoHS/REACH regulation. Among lead-free alternatives, the BaTiO$3$-based solid solution BZT-BCT reaches $d{33} \approx 620$ pC/N near its tricritical morphotropic phase boundary, rivalling soft PZT while remaining biocompatible. Exploiting this in a wearable confronts a sensitivity-flexibility paradox and three computational walls: the combinatorial explosion of atomic configurations in a disordered solid solution, the band-gap error of affordable density-functional approximations, which corrupts leakage and insulation estimates, and the 0 K nature of standard calculations against a 310 K operating temperature. We review lead-free piezoelectrics, morphotropic-boundary physics and fabricated flexible devices, then argue that equivariant machine-learning interatomic potentials --- coupled to a tiered functional hierarchy and finite-temperature lattice dynamics --- can survey the full configurational ensemble at body temperature and close the gap to a clinically viable lead-free pulse sensor.

cond-mat.mtrl-sci↗