arXiv ScienceSearch

arXiv · 2503.02560

Photometric Calibration & Spectral Validation of the Solar Ultraviolet Imaging Telescope onboard Aditya-L1

Abstract

The Solar Ultraviolet Imaging Telescope (SUIT) is one of the seven payloads on board Aditya-L1 mission of the Indian Space Research Organization (ISRO). SUIT provides full and partial disk images of the Sun in the 200-400 nm wavelength range. This would help us probe the solar atmosphere at different heights and understand the mass and energy transfer process between its layers. For the first time, SUIT will also help us measure spatially resolved solar spectral irradiance at this wavelength band, which is significant for studying the sun-climate relationships. To perform these studies, it is necessary to photometrically calibrate the payload and validate the spectral coverage of the various bandpasses. We perform the photometric calibration and spectral validation of 8 bandpasses using light of known intensity and spectral coverage. For photometric calibration, the telescope throughput is modeled using sun-as-a-star spectrum from SOLSTICE and SOLSPEC. The modeled throughput is compared with in-lab measurements taken with light of known intensity. The ratio of measured photoelectrons gathered with the modeled prediction agree within 20%. For spectral validation, readings are taken across the transmission spectrum of each filter, keeping adjacent readings independent of each other. The relative intensity measured at each wavelength is seen to trace the modeled telescope bandpass for that filter. These tests could not be performed for filters with bandpasses operating below 250 nm (NB01, BB01 and BB02), primarily due to heavy atmospheric attenuation in these wavelengths leading to decreased SNR of the data. The experimentally measured results agree closely with the modeled values, validating SUIT's optical performance and presenting the reliability of the developed throughput model.

Explore related subjects

Keep this discovery

BibTeXRIS

Janmejoy Sarkar, Soumya Roy, A N Ramaprakash, Rushikesh Deogaonkar, Sreejith Padinhatteeri, Durgesh Tripathi, Avyarthana Ghosh, Raja Bayanna Ankala, Gazi Ameen Ahmed. 2025-03-04. Photometric Calibration & Spectral Validation of the Solar Ultraviolet Imaging Telescope onboard Aditya-L1. https://arxiv.org/abs/2503.02560

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM