arXiv ScienceSearch

arXiv · 2502.14300

Experimental demonstrations of Josephson threshold detectors for broadband microwave photons detection

Abstract

Current-biased Josephson junctions (CBJJs) have been demonstrated as sensitive Josephson threshold detectors (JTDs) in the infrared range. In this letter, we show this kind of detector could also be used to detect broadband microwave photons. Based on the numerical simulations of the noise-driving phase dynamics of an underdamped Josephson junction, driven by the low-frequency triangular wave current, we argue that the microwave photons flowing across the JJ can be detected by probing the voltage switched signals of the JJ. Experimentally, we designed and fabricated the relevant Al/AlOx/Al Josephson device and measured its response to microwave photons at 50~mK temperature. Experimental results indicate that the weak microwave signals could be threatened as the additional noises modify the phase dynamics of the CBJJ, which could thus be detected by the generated JTD. The detection sensitivity is characterized by using the Kumar-Caroll index to differentiate the junction switched duration distributions, with and without microwave signal input. Although the demonstrated detection sensitivity is just $-92$~dBm (corresponding to approximately 30~photon/ns) for the microwave photons at $\sim 5$GHz (which is manifestly deviated from the plasma frequency of the fabricated JJ), we argued, based on the relevant numerical simulations, that the generated JTD could be used to achieve the sensitive detection of the microwave photons at the plasma frequency of the JJ.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jia-Xing He, Ya-Qiang Chai, Peng-Hui Ouyang, Hong Chang, L. F. Wei. 2025-02-20. Experimental demonstrations of Josephson threshold detectors for broadband microwave photons detection. https://doi.org/10.1063/5.0259463

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph