arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2501.09072

Genesis of the James Webb Space Telescope Architecture: The Designers' Story

Pierre Y. Bely·Garth D. Illingworth·Jonathan W. Arenberg·Charles Atkinson·Richard Burg·Mark Clampin·Lee D. Feinberg·Paul H. Geithner·John C. Mather·Michael T. Menzel·Max Nein·Larry Petro·David C. Redding·Bernard D. Seery·H. Philip Stahl·Massimo Stiavelli·Hervey Stockman·Scott P. Willoughby
View original source ↗Read source document ↗Export metadata ↓

Abstract

The James Webb Space Telescope, launched in 2021, is an infrared observatory of novel design: deployable, with active optics, fully open to space for radiative cooling and orbiting the Lagrange point no. 2. This article explains the rationale leading to this specific design and describes the various other architectures that were considered along the way: from a monolithic 10-meter telescope in geosynchronous orbit to a 6-meter one in High Earth Orbit, then a 16-meter observatory on the Moon, a 4- or 6-meter one in an elliptical heliocentric orbit, and a segmented 8-meter one passively cooled to 50 K at L2, which was finally descoped to 6.6 meters. It also addresses the optimization for scientific performance, the challenge of dealing with such an ultra-low operating temperature, cost issues, supporting technology, modifications made during final design and, finally, how the architecture performs on orbit.

Explore related subjects

astro-ph.IMphysics.space-ph

Keep this discovery

BibTeXRIS

Pierre Y. Bely, Garth D. Illingworth, Jonathan W. Arenberg, Charles Atkinson, Richard Burg, Mark Clampin, Lee D. Feinberg, Paul H. Geithner, John C. Mather, Michael T. Menzel, Max Nein, Larry Petro, David C. Redding, Bernard D. Seery, H. Philip Stahl, Massimo Stiavelli, Hervey Stockman, Scott P. Willoughby. 2025-01-15. Genesis of the James Webb Space Telescope Architecture: The Designers' Story. https://arxiv.org/abs/2501.09072

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗