arXiv ScienceSearch

arXiv · 2411.00607

Characterization of more than three years of in-orbit radiation damage of SiPMs on GRBAlpha and VZLUSAT-2 CubeSats

Abstract

Silicon photomultipliers (SiPMs) are prone to radiation damage which causes an increase of dark count rate. This leads to an increase in low-energy threshold in a gamma-ray detector combining SiPM and a scintillator. Despite this drawback, they are becoming preferred for scintillator-based gamma-ray detectors on CubeSats due to their low operation voltage, small size, linear response to low light intensity and fast response. This increasing popularity of SiPMs among new spaceborne missions makes it important to characterize their long-term performance in the space environment. In this work, we report the change of the dark count rate and low-energy threshold of S13360-3050 PE multi-pixel photon counters (MPPCs) by Hamamatsu, using measurements acquired by the GRBAlpha and VZLUSAT-2 CubeSats at low Earth orbit (LEO) spanning over three years. Such a long measurement of the performance of MPPCs in space has not been published before. GRBAlpha is a 1U CubeSat launched on March 22, 2021, to a 550 km altitude sun-synchronous polar orbit (SSO) carrying on board a gamma-ray detector based on CsI(Tl) scintillator readout by eight MPPCs and regularly detecting gamma-ray transients such as gamma-ray bursts and solar flares in the energy range of ~30-900 keV. VZLUSAT-2 is a 3U CubeSat launched on January 13, 2022 also to a 535 km altitude SSO carrying on board, among other payloads, two gamma-ray detectors similar to the one on GRBAlpha. We have flight-proven the Hamamatsu MPPCs S13360-3050 PE and demonstrated that MPPCs, shielded by 2.5 mm of PbSb alloy, can be used in LEO environment on a scientific mission lasting beyond three years. This manifests the potential of MPPCs being employed in future satellites.

Explore related subjects

Keep this discovery

BibTeXRIS

Jakub Ripa, Marianna Dafcikova, Pavel Kosik, Filip Munz, Masanori Ohno, Gabor Galgoczi, Norbert Werner, Andras Pal, Laszlo Meszaros, Balazs Csak, Yasushi Fukazawa, Hiromitsu Takahashi, Tsunefumi Mizuno, Kazuhiro Nakazawa, Hirokazu Odaka, Yuto Ichinohe, Jakub Kapus, Jan Hudec, Marcel Frajt, Maksim Rezenov, Vladimir Daniel, Petr Svoboda, Juraj Dudas, Martin Sabol, Robert Laszlo, Martin Koleda, Michaela Duriskova, Lea Szakszonova, Martin Kolar, Nikola Husarikova, Jean-Paul Breuer, Filip Hroch, Tomas Vitek, Ivo Vertat, Tomas Urbanec, Ales Povalac, Miroslav Kasal, Peter Hanak, Miroslav smelko, Martin Topinka, Hsiang-Kuang Chang, Tsung-Che Liu, Chih-Hsun Lin, Chin-Ping Hu, Che-Chih Tsao. 2024-11-01. Characterization of more than three years of in-orbit radiation damage of SiPMs on GRBAlpha and VZLUSAT-2 CubeSats. https://doi.org/10.1016/j.nima.2025.170513

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM