arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2409.05273

A new method to derive the calculation formula of antenna total isotropic sensitivity

Xiaoyu Hu
View original source ↗Read source document ↗Export metadata ↓

Abstract

In the OTA test of the antenna spatial performance of communication equipment,the total radiated power TRP and the total isotropic sensitivity TIS are two important characterization parameters,representing the overall transmission and reception performance of the antenna in space.In order to gain a deeper understanding of the physical meaning of these two parameters and the calculation method of TIS,this paper proposes a new method for deriving the TIS calculation formula.This method uses the reciprocity principle of the transmitting antenna and the receiving antenna.By comparing the transmitting process,two corresponding receiving antenna parameters are newly defined in the receiving process analysis.Combining the relationship between the antenna pattern and the receiving intensity,the relationship formula between TIS and equivalent isotropic sensitivity EIS is obtained after a simple deduction.This formula is consistent with the calculation formula given in the reference,but the derivation method in the reference is to use the ideal omnidirectional antenna as a reference,calculate the received power at the receiver input,and combine factors such as the actual antenna gain to derive the TIS calculation formula;the method proposed in this paper is to first derive the expression of the receiving directivity coefficient by definition,introduce the receiving strength parameter,calculate the full-space receiving power at the antenna,and derive the TIS calculation formula.In comparison,the derivation process in this paper calculates the received power from the input end of the receiving antenna,so there is no need to consider the efficiency of the antenna itself.The received power calculation starts directly from the receiving intensity.The entire derivation process is intuitive and easy to understand,avoiding complex concepts and formulas.

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xiaoyu Hu. 2024-09-09. A new method to derive the calculation formula of antenna total isotropic sensitivity. https://arxiv.org/abs/2409.05273

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗
arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗
arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗