arXiv ScienceSearch

arXiv · 2406.13673

The EUSO-SPB2 Fluorescence Telescope for the Detection of Ultra-High Energy Cosmic Rays

Abstract

The Extreme Universe Space Observatory on a Super Pressure Balloon 2 (EUSO-SPB2) flew on May 13$^{\text{th}}$ and 14$^{\text{th}}$ of 2023. Consisting of two novel optical telescopes, the payload utilized next-generation instrumentation for the observations of extensive air showers from near space. One instrument, the fluorescence telescope (FT) searched for Ultra-High Energy Cosmic Rays (UHECRs) by recording the atmosphere below the balloon in the near-UV with a 1~$\mu$s time resolution using 108 multi-anode photomultiplier tubes with a total of 6,912 channels. Validated by pre-flight measurements during a field campaign, the energy threshold was estimated around 2~EeV with an expected event rate of approximately 1 event per 10 hours of observation. Based on the limited time afloat, the expected number of UHECR observations throughout the flight is between 0 and 2. Consistent with this expectation, no UHECR candidate events have been found. The majority of events appear to be detector artifacts that were not rejected properly due to a shortened commissioning phase. Despite the earlier-than-expected termination of the flight, data were recorded which provide insights into the detectors stability in the near-space environment as well as the diffuse ultraviolet emissivity of the atmosphere, both of which are impactful to future experiments.

Explore related subjects

Keep this discovery

BibTeXRIS

James H. Adams Jr., Denis Allard, Phillip Alldredge, Luis Anchordoqui, Anna Anzalone, Matteo Battisti, Alexander A. Belov, Mario Bertaina, Peter F. Bertone, Sylvie Blin-Bondil, Julia Burton, Francesco S. Cafagna, Marco Casolino, Karel Černý, Mark J. Christ, Roberta Colalillo, Hank J. Crawford, Alexandre Creusot, Austin Cummings, Rebecca Diesing, Alessandro Di Nola, Toshikazu Ebisuzaki, Johannes Eser, Silvia Ferrarese, George Filippatos, William W. Finch, Flavia Flaminio, Claudio Fornaro, Duncan Fuehne, Christer Fuglesang, Diksha Garg, Alessio Golzio, Fausto Guarino, Claire Guépin, Tobias Heibges, Eleanor G. Judd, Pavel A. Klimov, John F. Krizmanic, Viktoria Kungel, Luke Kupari, Evgeny Kuznetsov, Massimiliano Manfrin, Wlodzimierz Marszal, John N. Matthews, Marco Mese, Stephan S. Meyer, Marco Mignone, Hiroko Miyamoto, Alexey S. Murashov, Jane M. Nachtman, Angela V. Olinto, Yasar Onel, Giuseppe Osteria, Beatrice Panico, Ètienne Parizot, Tom Paul, Miroslav Pech, Francesco Perfetto, Lech W. Piotrowski, Zbigniew Plebaniak, Jonatan Posligua, Guillaume Prévôt, Marika Przybylak, Patrick Reardon, Mary Hall Reno, Marco Ricci, Fred Sarazin, P. Schovánek, Valentina Scotti, Kenji Shinozaki, Jorge F. Soriano, Ben K. Stillwell, Jacek Szabelski, Yoshiyuki Takizawa, Daniil Trofimov, Fredrik Unel, Laura Valore, Tonia M. Venters, John Watts Jr., Lawrence Wiencke, Hannah Wistrand, Roy Young. 2024-06-19. The EUSO-SPB2 Fluorescence Telescope for the Detection of Ultra-High Energy Cosmic Rays. https://doi.org/10.1016/j.astropartphys.2024.103046

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM