arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2404.08651

Analysis of growth of silicon thin films on textured and non-textured surface

S. M. Iftiquar·S. N. Riaz·S. Mahapatra
View original source ↗Read source document ↗Export metadata ↓

Abstract

Hydrogenated amorphous silicon alloy films are generally deposited by radio frequency plasma enhanced chemical vapor deposition (RF PECVD) technique on various types of substrates. Generally it is assumed that film quality remains unchanged when deposited on textured or non-textured substrates. Here we analyzed the difference in growth of thin film silicon layers when deposited in a textured and a non-textured surface. In this investigation characteristics of two solar cells were compared, where one cell was prepared on a textured surface ( Cell-A) while the other prepared on a non-textured surface (Cell-B). Defect analysis of the devices were carried out by simulation and device modeling. It shows that the intrinsic film deposited on a textured surface was more defective ($2.4\times 10^{17}$ cm$^{-3}$) than that deposited on a flat surface ($3.2\times 10^{16}$ cm$^{-3}$). Although the primary differences in these two cells were thickness of the active layer and nature of surface texturing, the simulation results show that thin film deposited on a textured surface may acquire an increased defect density than that deposited on a flat surface. Lower effective flux density of $SiH_{3}$ precursors on the textured surface can be one of the reasons for higher defect density in the film deposited on textured surface. An Improved light coupling can be achieved by using a thinner doped window layer. By changing the thickness from 15 nm to 3 nm, the short circuit current density increased from 16.4 mA/cm$^{2}$ to 20.96 mA/cm$^{2}$ and efficiency increased from $9.4\%$ to $12.32\%$.

Explore related subjects

cond-mat.mtrl-sciphysics.app-phphysics.optics

Keep this discovery

BibTeXRIS

S. M. Iftiquar, S. N. Riaz, S. Mahapatra. 2024-03-14. Analysis of growth of silicon thin films on textured and non-textured surface. https://doi.org/10.1007/s12633-020-00624-w

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗