arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2403.06713

Influence of Li-stoichiometry on electrical and acoustic properties and temperature stability of Li(Nb,Ta)O$_{3}$ solid solutions up to 900 {\deg}C

Éva Tichy-Rács·Stepan Hurskyy·Uliana Yakhnevych·Piotr Gaczyński·Steffen Ganschow·Holger Fritze·Yuriy Suhak
View original source ↗Read source document ↗Export metadata ↓

Abstract

The current work is focused on the impact of the lithium stoichiometry on electrical conductivity, acoustic properties and high-temperature stability of single crystalline Li(Nb,Ta)O$_{3}$ at high temperatures. The crystals grown from Li-deficient melts were treated by the vapor transport equilibration (VTE) method, achieving near stoichiometric Li-content. It is shown, that the VTE-treated specimens generally exhibit lower conductivity at temperatures below 800 {\deg}C, which is attributed to the reduced number of Li-vacancies in near stoichiometric Li(Nb,Ta)O$_{3}$, provided that the Li-ion migration dominates the conductivity in this temperature range. Further, it is shown, that above 600-650 {\deg}C different mechanism increasingly contributes to the conductivity, which is consequently attributed to the electronic conduction. Further, it is shown that losses in LNT strongly increase above about 500 {\deg}C, which is interpreted to originate from conductivity-related relaxation mechanism. Finally, the thermal stability of Li(Nb,Ta)O$_{3}$ is evaluated by the measurement of the conductivity and resonance frequency as a function of time. It is found that during annealing at 700 {\deg}C for 350 hours, the resonance frequency of LiNbO$_{3}$ remains in a {\textpm} 100 ppm range of the initial value of 3.5 MHz.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Éva Tichy-Rács, Stepan Hurskyy, Uliana Yakhnevych, Piotr Gaczyński, Steffen Ganschow, Holger Fritze, Yuriy Suhak. 2024-03-11. Influence of Li-stoichiometry on electrical and acoustic properties and temperature stability of Li(Nb,Ta)O$_{3}$ solid solutions up to 900 {\deg}C. https://arxiv.org/abs/2403.06713

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗