arXiv ScienceSearch

arXiv · 2311.08418

New lower background and higher rate technique for anti-neutrino detection using Tungsten 183 Isotope

Abstract

Low energy anti-neutrinos detected from reactors or other sources have typically used the conversion of an anti-neutrino on Hydrogen, producing a positron and a free neutron. This neutron is subsequently captured on a secondary element with a large neutron capture cross section such as gadolinium or cadmium. We have studied the anti-neutrino conversion and suggest other elements that have a comparable cross section for anti-neutrino reactions. With most neutron captures on gadolinium, it is possible to get two or three delayed gamma signals of known energy to occur. Experiments like ATLAS can make measurements with timing on the order of 25 ns. With electronics like these, this leads to the possibility of having a triple delayed coincidence using the positron annihilation on atomic shell electrons as the starting signal. We have also found an isotope of tungsten, $^{183}$W that offers a large anti-neutrino interaction cross section of $1.19 \times 10^{-46}$ m$^2$ and an anti-neutrino threshold energy for the production of the ground state at 2.094 MeV and the production of the first excited state at 2.167 MeV. This reaction makes a nuclear m1 excited state of $^{183}$Ta$^*$ that emits a signature secondary gamma pulse of 73 keV with a 106 ns half-life. This offers a new delayed coincidence technique that can be used to identify anti-neutrinos with lower background noise. This allows for less shielding than required for modern inverse beta decay detectors.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jarred Novak, Nickolas Solomey, Brooks Hartsock, Brian Doty, Jonathan Folkerts. 2023-11-08. New lower background and higher rate technique for anti-neutrino detection using Tungsten 183 Isotope. https://arxiv.org/abs/2311.08418

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det