arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2307.02316

Unintended electromagnetic radiation from Starlink satellites detected with LOFAR between 110 and 188 MHz

F. Di Vruno·B. Winkel·C. G. Bassa·G. I. G. Józsa·M. A. Brentjens·A. Jessner·S. Garrington
View original source ↗Read source document ↗Export metadata ↓

Abstract

We report on observations of 68 satellites belonging to the SpaceX Starlink constellation with the LOFAR radio telescope. Radiation associated with Starlink satellites was detected at observing frequencies between 110 and 188 MHz. A combination of broad-band features, covering the entire observed bandwidth, as well as narrow-band (bandwidth < 12.2 kHz) emission at frequencies of 125, 135, 143.05, 150, and 175 MHz, was observed. The presence and properties of both the narrow- and broad-band features vary between satellites at different orbital altitudes. While the narrow-band detections at 143.05 MHz can be attributed to reflections of radar signals from the French GRAVES Space Surveillance Radar, the signal properties of the broad- and narrow-band features at the other frequencies suggest that this radiation is intrinsic to the Starlink satellites and it is seen for 47 out of the 68 Starlink satellites that were observed. We observed spectral power flux densities vary from 0.1 to 10 Jy for broad-band radiation, to 10 to 500 Jy for some of the narrow-band radiation, equivalent to electric field strengths of up to 49 dB[uV/m] (as measured at a 10 m distance from the satellites, with a measurement bandwidth of 120 kHz). In addition, we present equivalent power flux density simulations of the full Starlink phase 1 constellation, as well as other satellite constellations, for one frequency band allocated to radio astronomy by the International Telecommunication Union (ITU). With these, we calculate the maximum radiation level that each satellite constellation would need to have to comply with regulatory limits for intended emissions in that band. However, these limits do not apply if the radiation is unintended, that is to say if it does not originate from intentionally radiated signals for radio communication or other purposes. (shortened)

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

F. Di Vruno, B. Winkel, C. G. Bassa, G. I. G. Józsa, M. A. Brentjens, A. Jessner, S. Garrington. 2023-07-05. Unintended electromagnetic radiation from Starlink satellites detected with LOFAR between 110 and 188 MHz. https://doi.org/10.1051/0004-6361%2F202346374

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗