arXiv ScienceSearch

arXiv · 2306.17106

Flow Dynamics of a Dodecane Jet in Oxygen Crossflow at Supercritical Pressures

Abstract

In advanced aero-propulsion engines, kerosene is often injected into the combustor at supercritical pressures, where flow dynamics is distinct from the subcritical counterpart. Large-eddy simulation combined with real-fluid thermodynamics and transport theories of a N-dodecane jet in oxygen crossflow at supercritical pressures is presented. Liquid dodecane at 600 K is injected into a supercritical oxygen environment at 700 K at different supercritical pressures and jet-to-crossflow momentum flux ratios (J). Various vortical structures are discussed in detail. The results shown that, with the same jet-to-crossflow velocity ratio of 0.75, the upstream shear layer (USL) is absolutely unstable at 6.0 MPa (J = 7.1) and convectively unstable at 3.0 MPa (J = 13.2). This trend is consistent with the empirical criterion for the stability characteristics of a jet in crossflow at subcritical pressures (Jcr = 10). While decreasing J to 7.1 at 3.0 MPa, however, the dominant Strouhal number of the USL varies along the upstream jet trajectory, and the USL becomes convectively unstable. Such abnormal change in stability behavior can be attributed to the real-fluid effect induced by strong density stratification at pressure of 3.0 MPa, under which a point of inflection in the upstream mixing layer renders large density gradient and tends to stabilize the USL. The stability behavior with varying pressure and J is further corroborated by linear stability analysis. The analysis of spatial mixing deficiencies reveals that the mixing efficiency is enhanced at a higher jet-to-crossflow momentum flux ratio.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Siyu Ding, Jiabin Li, Longfei Wang, Chenxu Ni, Xingjian Wang. 2023-10-12. Flow Dynamics of a Dodecane Jet in Oxygen Crossflow at Supercritical Pressures. https://arxiv.org/abs/2306.17106

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Lagrangian-Eulerian learning of flow field and trajectories with TrajectoryFlowNet

Predicting particle transport in complex flows is traditionally achieved by solving the Navier-Stokes equations. While various numerical and experimental methods exist, they typically require deep physical insights and incur high computational costs. Machine learning offers an alternative by learning predictive patterns directly from data, avoiding explicit physical modeling. However, purely data-driven approaches often lack interpretability, physical consistency, and generalizability in sparse data regimes. To this end, we propose TrajectoryFlowNet, a Lagrangian-Eulerian physics-informed neural network architecture, for fluid flow velocimetry and imaging via learning to predict spatiotemporal flow fields and long-range particle trajectories. The salient features of our model include its ability to handle complex flow patterns with irregular boundaries, predict the full-field flows, image the long-range flow trajectory of any arbitrary particle, and ensure physical consistency in predictions based only on very scarce measurement of flow trajectories. We validate TrajectoryFlowNet via both numerical examples (e.g., lid-driven cavity flow and complex cylinder flow) and experimental test cases (e.g., aortic and ventricle blood flows) across diverse flow scenarios. The results demonstrate our model's effectiveness in capturing intricate particle-laden flow dynamics, enabling long-range tracking of particles and accurate construction of flow fields in real-world applications.

physics.flu-dyn

Sustained optothermal propulsion at the air-water interface by pulsating thermocapillary instability

In an axisymmetric meniscus lifted from a free water surface and locally heated through near infrared radiation by an optical fiber, natural buoyancy and geometric constraints confine the hot liquid near the apex. This confinement enhances the thermal gradient along the meniscus surface and, above a critical optical power, drives the system into an unstable convection regime. By analyzing the water refractive index oscillations at the meniscus apex and the simultaneous advection of nearby floating particles, we demonstrate that the instability is characterized by periodic thermocapillary pulses with tunable frequency and directionality. By controlling these features, we modulate the hydrodynamic forces generated by the pulsed surface flow and actuate particles at the meniscus interface in sustained oscillations or stable orbital trajectories. With about 20 mW optical power and particles ranging from 0.1 to 0.5 mm, rotational velocities up to 600 rpm are achieved, the highest reported for continuous optothermal actuation. Our results establish a highly efficient propulsion mechanism at fluid interfaces with potential applications in light-powered micromotors, interfacial transport and soft microrobotics. More broadly, the optically heated meniscus configuration provides a simple and adaptable platform for generating, controlling and detecting large thermocapillary instabilities on fluid surfaces.

physics.flu-dyn

A Kinetic Study of Hypersonic Boundary Layer Second Mack Mode Instabilities

A flat-plate laminar boundary layer is simulated at a free stream Mach number of 6 and unit Reynolds number $Re_1 \sim 1.18\times 10^7$ m$^{-1}$ using the Direct Simulation Monte Carlo (DSMC) method to capture and analyze spontaneous second-mode instability growth. Power spectral density (PSD) analysis identifies dominant frequencies of 200-500 kHz, in line with linear stability theory (LST) predictions. Near-wall perturbations remain confined within the unstable regions known from linear theory. An analytic kinetic fluctuation floor was derived to predict the limit of the DSMC predicted fluctuations taking into account the method of window averaging performed in Dynamic Mode Decomposition (DMD) analyses. DMD of unsteady flowfield snapshots reveals wave packets of spatially coherent modes having wavelengths and phase speeds characteristic of the acoustic second-mode; their growth and decay occur within the LST-predicted unstable bounds. It was observed that the DSMC-simulated flowfield naturally developed second Mack mode instabilities without any external seeding, i.e., arising spontaneously from the kinetic fluctuations of the simulated gas and of amplitude higher than the predicted DSMC numerical error. Targeted interaction with these flow instabilities is demonstrated for an acoustic vibrating surface (AVS), where forcing at the unstable frequency of 250 kHz results in amplified waves downstream, while at the stable frequency of 400 kHz AVS-induced disturbances are damped. This further emphasizes the ability of the present kinetic simulations to capture and describe linear perturbations at Reynolds numbers corresponding to those of Mach 6 flight at altitudes of $\sim$20 km and suggests that DSMC will be a tool for understanding theoretically-founded study and control of laminar-turbulent transition in hypersonic boundary layers.

physics.flu-dyn