arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2304.14927

A comparison of mechanistic models for the combustion of iron microparticles and their application to polydisperse iron-air suspensions

Johannes Mich·Daniel Braig·Tobias Gustmann·Christian Hasse·Arne Scholtissek
View original source ↗Read source document ↗Export metadata ↓

Abstract

Metals can serve as carbon-free energy carriers, e. g. in innovative metal-metal oxide cycles as proposed by Bergthorson (Prog. Energy Combust. Sci., 2018). Iron powder is a suitable candidate since it can be oxidized with air. Nevertheless, the combustion of iron powder in air is challenging especially with respect to flame stabilization which depends on the particle size distribution among other factors. Models for the prediction of reaction front speed in iron-air suspensions can contribute to overcoming this challenge. To this end, three different models for iron particle oxidation are integrated into a laminar flame solver for simulating reaction fronts. The scientific objective of this work is to elucidate the influence of polydispersity on the reaction front speed, which is still not satisfactorily understood. In a systematic approach, cases with successively increasing complexity are considered: From single particle combustion to iron-air suspensions prescribing binary particle size distributions (PSDs), generic PSDs, and a PSD measured for a real iron powder sample. The simulations show that, dependent on the PSD, particles undergo thermochemical conversion in a sequential manner according to their size and every particle fraction exhibits an individual combustion environment. The local environment can be leaner or richer than the overall iron-to-air ratio would suggest and can be very different from single particle experiments. The contribution of individual particle fractions to the overall reaction front speed depends on its ranking within the PSD. The study further demonstrates, that although the three particle models show good agreement for single particle combustion, they lead to very different reaction front speeds. This is due to the different ignition behavior predicted by the particle models, which is shown to strongly influence the reaction front characteristics.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Johannes Mich, Daniel Braig, Tobias Gustmann, Christian Hasse, Arne Scholtissek. 2023-04-28. A comparison of mechanistic models for the combustion of iron microparticles and their application to polydisperse iron-air suspensions. https://arxiv.org/abs/2304.14927

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗