arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2301.09499

Study on the composition optimization method for improving the fluidity of cast Ti$_2$AlNb alloy and its mechanism

Zhang Jian·Zhang Xiwen·Wang Hongwei·Wu Mengwei·Ma Xiong·Liang Xiaobo·Zhang Jianwei·Liu Ruiping·Sun Zhimin·Zhang Ji
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this paper, the effects of Al, Nb main elements, Fe, Mo, W, Co, B, Si and their contents on the fluidity of Ti-22Al-25Nb alloy were investigated. The composition that was beneficial to improve the fluidity was screened through the thermodynamic software calculating thermophysical parameters affecting the fluidity of Ti$_2$AlNb alloy, the numerical simulation test of its fluidity and the verification test of the fluidity of optimized alloys. Finally, the improvement mechanism of the alloy fluidity was discussed. Results showed that the appropriate reduction of Nb element was better than Al element for the improvement of fluidity. The addition of trace Fe, B and Si elements were beneficial to the improvement of fluidity, the improvement effect of B element was best, while the addition of trace Mo, W, Co were not conducive to the improvement of fluidity. The cessation mechanism of Ti$_2$AlNb alloy is the cessation mechanism of the alloy with a wide crystallization temperature range. The composition which was most beneficial to improve the fluidity was Ti-22Al-24Nb-0.1B. The main reasons for the improvement of the fluidity had two sides: on the one hand, the reduction of 1at% Nb and the addition of 0.1at% B not only increased the superheat and crystallization latent heat of the alloy, but also reduced the melt viscosity and thermal conductivity, thus improving the fluidity. On the other hand, the TiB phase refined the grains, the fine grains prevented the dendrite from growing into developed dendrite networks, inhibited the adverse effect of the increase in the width of the solidification zone on the fluidity, reduced the flow resistance of the molten metal, and further improved the fluidity of the alloy.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Zhang Jian, Zhang Xiwen, Wang Hongwei, Wu Mengwei, Ma Xiong, Liang Xiaobo, Zhang Jianwei, Liu Ruiping, Sun Zhimin, Zhang Ji. 2023-01-23. Study on the composition optimization method for improving the fluidity of cast Ti$_2$AlNb alloy and its mechanism. https://arxiv.org/abs/2301.09499

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗