PODIUM:A Pulsar Navigation Unit for Science Missions

Francesco Cacciatore; Víctor Gómez Ruiz; Gonzalo Taubmann; Jacinto Muñoz; Pablo Hermosín; Marcello Sciarra; Martiño Saco; Nanda Rea; Margarita Hernanz; Emilie Parent; Jeroen Vandersteen

arXiv · 2301.08744

PODIUM:A Pulsar Navigation Unit for Science Missions

Francesco Cacciatore·Víctor Gómez Ruiz·Gonzalo Taubmann·Jacinto Muñoz·Pablo Hermosín·Marcello Sciarra·Martiño Saco·Nanda Rea·Margarita Hernanz·Emilie Parent·Jeroen Vandersteen

View original source ↗Read source document ↗Export metadata ↓

Abstract

PODIUM is a compact spacecraft navigation unit, currently being designed to provide interplanetary missions with autonomous position and velocity estimations. The unit will make use of Pulsar X-ray observations to measure the distance and distance rate from the host spacecraft to the Solar System Barycenter. Such measurements will then be used by the onboard orbit determination function to estimate the complete orbital elements of the spacecraft. The design aims at 6 kg of mass and 20 W of power, in a volume of 150 mm by 240 mm by 600 mm. PODIUM is designed to minimize the impact on the mission operational and accommodation constraints. The architecture is based on a grazing incidence X-ray telescope with focal distance limited to 50 cm. The effective area shall be in the range 25 to 50 cm2 for photon energies in the range 0.2-10 keV, requiring nesting of several mirrors in the Wolter-1 geometry. Grazing incidence angles will be very small, below 2 deg. The current target FOV is 0.25 deg. The pulsars photon arrivals are detected with a single pixel Silicon Drift Detector (SDD) sensor with timing accuracy below 1usec. The unit has no gimbaling to meet the applicable power, size and mass requirements. Instead, the host spacecraft shall slew and point to allow pulsar observation. The avionics architecture is based on a radiation hardened LEON4 processor, to allow a synchronous propagation task and measurement generation and orbit determination step in an asynchronous task. PODIUM will enable higher autonomy and lower cost for interplanetary missions. L2 space observatories and planetary flybys are the current reference use cases. Onboard autonomous state estimation can reduce the ground support effort required for navigation and orbit correction/maintenance computation, and reduce the turnaround time, thus enabling more accurate maneuvers, reducing the orbit maintenance mass budget.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeX RIS

Francesco Cacciatore, Víctor Gómez Ruiz, Gonzalo Taubmann, Jacinto Muñoz, Pablo Hermosín, Marcello Sciarra, Martiño Saco, Nanda Rea, Margarita Hernanz, Emilie Parent, Jeroen Vandersteen. 2023-01-20. PODIUM:A Pulsar Navigation Unit for Science Missions. https://arxiv.org/abs/2301.08744

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗

arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗

arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗