arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2212.01718

Interaction of Shock Train with Cavity Shear Layer in a Scramjet Isolator

Vignesh Ram Petha Sethuraman·Yosheph Yang·Jae Gang Kim
View original source ↗Read source document ↗Export metadata ↓

Abstract

The interaction between the self-excited shock train flow and the cavity shear layer in a scramjet isolator is investigated numerically using detached-eddy simulations (DES). The effect of changing the position of the shock train by controlling the back pressure ratio and the effect of changing the cavity front wall angle are analyzed using unsteady statistics and modal analysis. The propagation mechanism of the pressure disturbance was investigated by spatiotemporal cross-correlation coefficient analysis. In the present numerical study, a constant isolator section with a cavity front wall was considered, followed by a diffuser section simulated at Mach number 2.2 with three different back pressure ratios. The change in back pressure provides three different conditions. To understand the unsteady dynamics of the interaction of the shear layer with the shock train, the spatiotemporal trajectory of the wall pressure and the centerline pressure distribution, the spatiotemporal cross-correlation coefficient, and the modal analysis by dynamic mode decomposition are obtained. The results show that the low-frequency shock train oscillation dominates the cavity oscillation. The spatiotemporal cross-correlation between the wall surface and the cavity bottom wall indicates the propagation of local disturbances originating from the separated boundary layer caused by the shock and the recirculation zone in the corners of the cavity. Dynamic mode decomposition analysis shows the shear layer at the leading edge of the cavity and the downstream propagation of large eddies from the cavity. It also shows the pairing of coherent structures between the shock train and the recirculation zone of the cavity.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Vignesh Ram Petha Sethuraman, Yosheph Yang, Jae Gang Kim. 2022-12-04. Interaction of Shock Train with Cavity Shear Layer in a Scramjet Isolator. https://doi.org/10.1063/5.0137481

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗