arXiv ScienceSearch

arXiv · 2207.03272

Early results from GRBAlpha and VZLUSAT-2

Abstract

We present the detector performance and early science results from GRBAlpha, a 1U CubeSat mission, which is a technological pathfinder to a future constellation of nanosatellites monitoring gamma-ray bursts (GRBs). GRBAlpha was launched in March 2021 and operates on a 550 km altitude sun-synchronous orbit. The gamma-ray burst detector onboard GRBAlpha consists of a 75x75x5 mm CsI(Tl) scintillator, read out by a dual-channel multi-pixel photon counter (MPPC) setup. It is sensitive in the ~30-900 keV range. The main goal of GRBAlpha is the in-orbit demonstration of the detector concept, verification of the detector's lifetime, and measurement of the background level on low-Earth orbit, including regions inside the outer Van Allen radiation belt and in the South Atlantic Anomaly. GRBAlpha has already detected five, both long and short, GRBs and two bursts were detected within a time-span of only 8 hours, proving that nanosatellites can be used for routine detection of gamma-ray transients. For one GRB, we were able to obtain a high resolution spectrum and compare it with measurements from the Swift satellite. We find that, due to the variable background, the time fraction of about 67 % of the low-Earth polar orbit is suitable for gamma-ray burst detection. One year after launch, the detector performance is good and the degradation of the MPPC photon counters remains at an acceptable level. The same detector system, but double in size, was launched in January 2022 on VZLUSAT-2 (3U CubeSat). It performs well and already detected three GRBs and two solar flares. Here, we present early results from this mission as well.

Explore related subjects

Keep this discovery

BibTeXRIS

Jakub Ripa, Andras Pal, Masanori Ohno, Norbert Werner, Laszlo Meszaros, Balazs Csak, Marianna Dafcikova, Vladimir Daniel, Juraj Dudas, Marcel Frajt, Peter Hanak, Jan Hudec, Milan Junas, Jakub Kapus, Miroslav Kasal, Martin Koleda, Robert Laszlo, Pavol Lipovsky, Filip Munz, Maksim Rezenov, Miroslav Smelko, Petr Svoboda, Hiromitsu Takahashi, Martin Topinka, Tomas Urbanec, Jean-Paul Breuer, Teruaki Enoto, Zsolt Frei, Yasushi Fukazawa, Gabor Galgoczi, Filip Hroch, Yuto Ichinohe, Laszlo Kiss, Hiroto Matake, Tsunefumi Mizuno, Kazuhiro Nakazawa, Hirokazu Odaka, Helen Poon, Nagomi Uchida, Yuusuke Uchida. 2022-07-07. Early results from GRBAlpha and VZLUSAT-2. https://doi.org/10.1117/12.2629332

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM