Observation of Ultrafast Interfacial Exciton Formation and Recombination in Graphene/MoS2 Heterostructure

Yuqing Zou; Qiu-Shi Ma; Zeyu Zhang; Ruihua Pu; Wenjie Zhang; Peng Suo; Jiaming Chen; Di Li; Hong Ma; Xian Lin; Yuxin Leng; Weimin Liu; Juan Du; Guohong Ma

arXiv · 2203.10878

Observation of Ultrafast Interfacial Exciton Formation and Recombination in Graphene/MoS2 Heterostructure

Yuqing Zou·Qiu-Shi Ma·Zeyu Zhang·Ruihua Pu·Wenjie Zhang·Peng Suo·Jiaming Chen·Di Li·Hong Ma·Xian Lin·Yuxin Leng·Weimin Liu·Juan Du·Guohong Ma

View original source ↗Read source document ↗Export metadata ↓

Abstract

In this study,we combined time-resolved terahertz spectroscopy along with transient absorption spectroscopy to revisit the interlayer non-equilibrium carrier dynamics in largely lateral size Gr/MoS2 heterostructure fabricated with chemical vapor deposition method. Our experimental results reveal that, with photon-energy below the A-exciton of MoS2 monolayer, hot electrons transfer from graphene to MoS2 takes place in time scale of less than 0.5 ps, resulting in ultrafast formation of interfacial exciton in the heterostructure, subsequently, recombination relaxation of the interfacial exciton occurs in time scale of ~18 ps. A new model considering carrier heating and photogating effect in graphene is proposed to estimate the amount of carrier transfer in the heterostructure, which shows a good agreement with experimental result. Moreover, when the photon-energy is on-resonance with the A-exciton of MoS2, photogenerated holes in MoS2 are transferred to graphene layer within 0.5 ps, leading to the formation of interfacial exciton, the subsequent photoconductivity (PC) relaxation of graphene and bleaching recovery of A-exciton in MoS2 take place around ~10 ps time scale, ascribing to the interfacial exciton recombination. The faster recombination time of interfacial exciton with on-resonance excitation could come from the reduced interface barrier caused by bandgap renormalization effect. Our study provides deep insight into the understanding of interfacial charge transfer as well as the relaxation dynamics in graphene-based heterostructures, which are promising for the applications of graphene-based optoelectronic devices.

Explore related subjects

physics.optics cond-mat.mtrl-sci

Keep this discovery

BibTeX RIS

Yuqing Zou, Qiu-Shi Ma, Zeyu Zhang, Ruihua Pu, Wenjie Zhang, Peng Suo, Jiaming Chen, Di Li, Hong Ma, Xian Lin, Yuxin Leng, Weimin Liu, Juan Du, Guohong Ma. 2022-03-21. Observation of Ultrafast Interfacial Exciton Formation and Recombination in Graphene/MoS2 Heterostructure. https://arxiv.org/abs/2203.10878

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗