arXiv ScienceSearch

arXiv · 2111.04075

Multi-frequency point source detection with fully convolutional networks: Performance in realistic microwave sky simulations

Abstract

Point Source (PS) detection is an important issue for future Cosmic Microwave Background (CMB) experiments since they are one of the main contaminants to the recovery of CMB signal at small scales. Improving its multifrequency detection would allow to take into account valuable information otherwise neglected when extracting PS using a channel-by-channel approach. We develop a method based on Neural Networks (NNs) to detect PS in multifrequency realistic simulations and compare its performance against one of the most popular methods, the matrix filters. The frequencies used are 143, 217 and 353 GHz and we impose a Galactic cut of 30 degrees. We produce simulations by adding contaminating signals to the PS maps as the CMB, the Cosmic Infrared Background, the Galactic thermal emission, the thermal Sunyaev-Zel'dovich effect and the instrumental noise. These simulations are used to train two NNs called Flat and Spectral MultiPoSeIDoN. The first one considers PS with a flat spectrum and the second one is more realistic because it takes into account the spectral behavior of the PS. Using a detection limit of 60 mJy, Flat MultiPoSeIDoN reachs the 90% of completeness level at 58 mJy and at 79, 71 and 60 for the spectral case at 143, 217 and 353 GHz respectively, while the matrix filters reach it at 84, 79 and 123 mJy. Using safer 4{\sigma} detection limit does not help to improve these results. In all cases, MultiPoSeIDoN obtain a much lower number of spurious sources than the filter. The NNs recover the flux density of the detections with a relative error of 10% above 100 mJy, while the filter above 150 mJy. Based on the results, NNs are the perfect candidates to substitute filters to detect multifrequency PS in future CMB experiments. Moreover, we have shown that a multifrequency approach can detect sources with higher accuracy than single-frequency approaches also based on NNs.

Explore related subjects

Keep this discovery

BibTeXRIS

J. M. Casas, J. González-Nuevo, L. Bonavera, D. Herranz, S. L. Suárez Gómez, M. M. Cueli, D. Crespo, J. D. Santos, M. L. Sánchez, F. Sánchez-Lasheras, F. J. de Cos. 2021-11-07. Multi-frequency point source detection with fully convolutional networks: Performance in realistic microwave sky simulations. https://doi.org/10.1051/0004-6361%2F202141874

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM