arXiv ScienceSearch

arXiv · 2108.04654

The H.E.S.S. Gravitational Wave Rapid Follow-up Program during O2 and O3

Abstract

Since 2015, the direct detection of Gravitational Waves (GWs) became possible with ground-based interferometers like LIGO and Virgo. GWs became the center of attention of the astronomical community and electromagnetic observatories took a particular interest in follow-up observations of such events. The main setback of these observations is the poor localization of GW events. In fact, GW localization uncertainties can span tens to hundreds of deg$^{2}$ the sky even with the advanced configurations of current GW interferometers. In this contribution, we present five follow-up strategies developed for the High Energy Stereoscopic System (H.E.S.S.) and assess their performances. We show how a 2D and 3D galaxy targeted search approach exploiting the integral probability inside the instruments field of view are best suited for medium field of view instruments like H.E.S.S. We also develop an automatic response scheme within the H.E.S.S. Transient Follow-up system that is optimized for fast response and is capable of responding promptly to all kind of GW alerts. GW events are filtered by the developed scheme and prompt and afterglow observations are automatically scheduled. The H.E.S.S. response latency to prompt alerts is measured to be less than 1 minute. With this continually optimized GW response scheme, H.E.S.S. scheduled several GW follow-up observations during the second and third LIGO/Virgo observation runs.

Explore related subjects

Keep this discovery

BibTeXRIS

Halim Ashkar, Francois Brun, Matthias Füßling, Clemens Hoischen, Ruslan Konno, Stefan Ohm, Heike Prokoph, Patrick Reichherzer, Fabian Schüssler, Monica Seglar Arroyo, Sylvia J Zhu. 2021-08-10. The H.E.S.S. Gravitational Wave Rapid Follow-up Program during O2 and O3. https://doi.org/10.22323/1.395.0936

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM