arXiv ScienceSearch

arXiv · 2106.07701

Evolution of the energy efficiency of LHCb's real-time processing

Abstract

The upgraded LHCb detector, due to start datataking in 2022, will have to process an average data rate of 4~TB/s in real time. Because LHCb's physics objectives require that the full detector information for every LHC bunch crossing is read out and made available for real-time processing, this bandwidth challenge is equivalent to that of the ATLAS and CMS HL-LHC software read-out, but deliverable five years earlier. Over the past six years, the LHCb collaboration has undertaken a bottom-up rewrite of its software infrastructure, pattern recognition, and selection algorithms to make them better able to efficiently exploit modern highly parallel computing architectures. We review the impact of this reoptimization on the energy efficiency of the real-time processing software and hardware which will be used for the upgrade of the LHCb detector. We also review the impact of the decision to adopt a hybrid computing architecture consisting of GPUs and CPUs for the real-time part of LHCb's future data processing. We discuss the implications of these results on how LHCb's real-time power requirements may evolve in the future, particularly in the context of a planned second upgrade of the detector.

Explore related subjects

Keep this discovery

BibTeXRIS

Roel Aaij, Daniel Hugo Cámpora Pérez, Tommaso Colombo, Conor Fitzpatrick, Vladimir Vava Gligorov, Arthur Hennequin, Niko Neufeld, Niklas Nolte, Rainer Schwemmer, Dorothea Vom Bruch. 2021-06-14. Evolution of the energy efficiency of LHCb's real-time processing. https://doi.org/10.1051/epjconf/202125104009

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det