arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2105.07976

Mach Number Dependence of Flow Instability around a Spiked Body

Ashish Vashishtha·Shashank Khurana
View original source ↗Read source document ↗Export metadata ↓

Abstract

A forward-facing aerospike have been identified as a passive flow control device for enhancing the aerodynamic efficiency and reducing the heat transfer in high-speed flows. In addition, it has been reported that the presence of a spike brings in unsteadiness in the form of oscillation and pulsation to the structure. Previous researchers have investigated the aerothermodynamic coefficients, together with offering a detailed explanation of the flow physics and associated unsteadiness, and their dependence on the spike's geometric characteristics (spike nose, and length-to-fore-body diameter ratio, L/D). This work focuses on ascertaining the role of flow speeds (free-stream Mach number), and their energy content, in governing the physics around a spiked body, which is yet to be established. Numerical investigation has been carried out using axisymmetric Navier-Stokes laminar flow solver for Mach number range of 2.0 to 7.0. A round-tip spike with flat-face cylindrical after-body have been simulated for spike length ratio of L/D = 2.0, with spike diameter to fore-body diameter of 0.1. The flow unsteadiness has been analyzed with drag and pressure coefficients variation at different Mach numbers. It was found that the flow field around the spiked blunt nose behaves in pulsation mode at lower Mach numbers 2, 3 and transition to oscillatory mode at higher Mach numbers 5, 6 and 7, while remain almost stable at Mach 4. The limit of Strouhal Number for characterizing the pulsation and oscillation modes at various Mach numbers for spike length of L/D = 2 with flat after-body is observed as 0.2, however it may very well depend on other geometric parameters of spike and after-body.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Ashish Vashishtha, Shashank Khurana. 2021-05-17. Mach Number Dependence of Flow Instability around a Spiked Body. https://doi.org/10.1063/5.0127721

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗