arXiv ScienceSearch

arXiv · 2101.11817

Acoustic Communication and Sensing for Inflatable Modular Soft Robots

Abstract

Modular soft robots combine the strengths of two traditionally separate areas of robotics. As modular robots, they can show robustness to individual failure and reconfigurability; as soft robots, they can deform and undergo large shape changes in order to adapt to their environment, and have inherent human safety. However, for sensing and communication these robots also combine the challenges of both: they require solutions that are scalable (low cost and complexity) and efficient (low power) to enable collectives of large numbers of robots, and these solutions must also be able to interface with the high extension ratio elastic bodies of soft robots. In this work, we seek to address these challenges using acoustic signals produced by piezoelectric surface transducers that are cheap, simple, and low power, and that not only integrate with but also leverage the elastic robot skins for signal transmission. Importantly, to further increase scalability, the transducers exhibit multi-functionality made possible by a relatively flat frequency response across the audible and ultrasonic ranges. With minimal hardware, they enable directional contact-based communication, audible-range communication at a distance, and exteroceptive sensing. We demonstrate a subset of the decentralized collective behaviors these functions make possible with multi-robot hardware implementations. The use of acoustic waves in this domain is shown to provide distinct advantages over existing solutions.

Explore related subjects

Keep this discovery

BibTeXRIS

D. S. Drew, M. Devlin, E. Hawkes, S. Follmer. 2021-01-28. Acoustic Communication and Sensing for Inflatable Modular Soft Robots. https://arxiv.org/abs/2101.11817

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

IMLE-VLA: Fast Single-Step Action Generation for Vision-Language-Action Policies

Vision-language-action (VLA) policies leverage pretrained vision-language backbones to achieve strong cross-task generalization. A leading design couples this backbone with a dedicated continuous action head trained via diffusion or flow matching. However, such heads rely on iterative multi-step sampling, for example 10 Euler steps in $\pi_{0.5}$. This creates an inference bottleneck that produces stop-and-go movement in the robot and slower task completion. We introduce IMLE-VLA, which replaces the iterative action head with a single-step conditional generator trained via conditional Implicit Maximum Likelihood Estimation (cIMLE). The cIMLE objective promotes multimodal action coverage, avoiding the mode collapse of naive regression heads while eliminating multi-step sampling entirely. When IMLE-VLA is applied to $\pi_{0.5}$, it increases inference frequency 3.67x (55 Hz vs. 15 Hz), enabling up to 11x higher action throughput. On the 40-task LIBERO benchmark, IMLE-VLA achieves the highest average success rate (98.0%) among all baselines while leading in inference frequency. Under the test-time perturbations of LIBERO-plus, IMLE-VLA retains $\pi_{0.5}$'s robustness while other baselines degrade sharply, confirming that the cIMLE head preserves generalization. Real-world experiments on a Franka Emika Panda across four tasks demonstrate smoother motion (2.2x to 3.0x lower jerk) and faster task completion, with IMLE-VLA outperforming $\pi_{0.5}$ on every task and reducing average VLA inference time per episode by 3.9x to 6.6x. Videos and code are available at https://kianhk6.github.io/IMLE-VLA/

cs.RO

ObstaDiff: Generalizable Diffusion Policy Learning via Obstacle-aware Representations

Imitation learning has achieved impressive results in robotic manipulation, yet most existing approaches assume clean backgrounds and lack explicit mechanisms for obstacle-aware motion generation. Extending such policies to cluttered, real-world scenes with unstructured obstacles remains a key generalization challenge. We present ObstaDiff, a decomposed diffusion-policy framework with a lightweight obstacle-aware visual encoder. ObstaDiff extracts a structured target-obstacle-background representation, enabling the downstream alignment policy to generate end-effector trajectories toward a target-centered bottleneck pose while reasoning about surrounding obstacles. We evaluate ObstaDiff on 61 real-robot greenhouse trials per method (366 executions in total). ObstaDiff achieves 75.41% average task success and 8.20% average obstacle collision rate, outperforming representative imitation-learning baselines and improving generalization in cluttered agricultural scenes.

cs.RO

Testing Between the Test Cases: Proving End-to-End Steering in Conditions You Never Drove

AI-based automated vehicle testing is challenging because a model that passes every test condition can still fail in the real world. Formal verification offers a way to directly address this gap. On a simulated highway and an arterial road we trained two small end-to-end steering networks each in CARLA, one on clear conditions alone and one on clear, fog, night and low sun. All four models were driven against a 2.19 ft lane-departure budget. Without driving again, we used bound propagation, a formal method that reads the trained weights, to compute how far steering can drift at every disturbance strength between two captured images. One calculation covers more than a campaign could drive: on the arterial it spans 133 poses, where ten intensities each would be 10^133 combinations, in minutes on one GPU. Not only did formal verification find conditions that broke the clear-trained policy without simulation testing, it provided some preliminary evidence for potential failures between the test cases. Our overall conclusion is that formal verification is a viable complement to simulation, and could be adopted as a part of verification and validation for automated driving.

cs.RO