arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2012.14473

Hybrid System for Solar Energy Conversion with Nano-Structured Electrodes

M. M. Nishchenko·M A Shevchenko·E A Tsapko·A A Frolov·G A Frolov·L. L. Sartinska·A. I. Blanovsky
View original source ↗Read source document ↗Export metadata ↓

Abstract

Solar energy is clean and renewable but has a low flux density. The lack of a continuous and reliable power supply reduces their average daily output. Since the infrared part is not utilized to produce electricity, conventional photovoltaic cells use only about half of the solar spectrum. Direct radiation flux is also necessary for solar Stirling engine to work efficiently. The hybrid system can largely overcome these problems. The design combines the photovoltaic and energy storage-integrated Stirling engine or thermal field emission technologies in the same concentrating solar power system, providing a great potential in terms of energy production per unit area. The photovoltaic cells can be deposited on the concentrating solar power main mirror to allow the system to collect and convert the diffuse component of the light. The design allows utilization of existing equipment, particularly a high-grade parabolic dish or midgrade Fresnel concentrator for rooftop installation. To optimize the use of solar energy, beam splitters thermally decouple the modules by splitting the solar spectrum into three spectral ranges and directing visible, ultraviolet and infrared radiation into the photovoltaic cells, gate/Cs-filled gap and cavity-type solar receiver, respectively. A photon-enhanced gate electrode creates on the cathode surface an electrostatic field large enough to compensate space charge field and initiates thermal field emission process. In the thermal field emission cathodes with nano-structured surfaces, the current density can reach values close to the field emission limit. The design of the electrodes based on nano-structured emission materials were experimentally explored by the co-authors. In these experiments, efficiency of heat-to-electricity conversion was investigated and conditions for advanced nano-materials application for harvesting solar energy were found.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

M. M. Nishchenko, M A Shevchenko, E A Tsapko, A A Frolov, G A Frolov, L. L. Sartinska, A. I. Blanovsky. 2020-12-28. Hybrid System for Solar Energy Conversion with Nano-Structured Electrodes. https://arxiv.org/abs/2012.14473

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗