arXiv ScienceSearch

arXiv · 2008.05435

Project Lyra: Catching 1I/'Oumuamua Using Nuclear Thermal Rockets

Abstract

The first definite interstellar object observed in our solar system was discovered in October of 2017 and was subsequently designated 1I/'Oumuamua. In addition to its extrasolar origin, observations and analysis of this object indicate some unusual features which can only be explained by in-situ exploration. For this purpose, various spacecraft intercept missions have been proposed. Their propulsion schemes have been chemical, exploiting a Jupiter and Solar Oberth Maneuver (mission duration of 22 years) and also using Earth-based lasers to propel laser sails (1-2 years), both with launch dates in 2030. For the former, mission durations are quite prolonged and for the latter, the necessary laser infrastructure may not be in place by 2030. In this study Nuclear Thermal Propulsion (NTP) is examined which has yet to materialise as far as real missions are concerned, but due to its research and development in the NASA Rover/NERVA programs, actually has a higher TRL than laser propulsion. Various solid reactor core options are studied, using either engines directly derived from the NASA programs, or more advanced options, like a proposed particle bed NTP system. With specific impulses at least twice those of chemical rockets, NTP opens the opportunity for much higher {\Delta}V budgets, allowing simpler and more direct, time-saving trajectories to be exploited. For example a spacecraft with an upgraded NERVA/Pewee-class NTP travelling along an Earth-Jupiter-1I trajectory, would reach 1I/'Oumuamua within 14 years of a launch in 2031. The payload mass to 1I/'Oumuamua would be around 2.5metric tonnes, but even larger masses and shorter mission durations can be achieved with some of the more advanced NTP options studied. In all 4 different proposed NTP systems and 5 different trajectory scenarios are examined.

Explore related subjects

Keep this discovery

BibTeXRIS

Adam Hibberd, Andreas M. Hein. 2020-08-12. Project Lyra: Catching 1I/'Oumuamua Using Nuclear Thermal Rockets. https://doi.org/10.1016/j.actaastro.2020.11.038

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM