Design of Transmission Line and Electromagnetic Field Sensors for DC Partial Discharge Analysis

Mojtaba Rostaghi-Chalaki; Kamran Yousefpour; J. Patrick Donohoe; Mehmet Kurum; Chanyeop Park; Joni Kluss

Home/Archive/arXiv

arXiv · 2007.06017

Design of Transmission Line and Electromagnetic Field Sensors for DC Partial Discharge Analysis

Mojtaba Rostaghi-Chalaki·Kamran Yousefpour·J. Patrick Donohoe·Mehmet Kurum·Chanyeop Park·Joni Kluss

View original source ↗Read source document ↗Export metadata ↓

Abstract

Accurate measurement circuit and high-frequency sensors with sufficient bandwidth are necessary for the analysis of individual partial discharge (PD) pulses. In this paper, a testbed is designed and constructed for the investigation of DC PD pulses. The testbed is equipped with a 50 ohm transmission line (TL) that terminate to an oscilloscope for measuring the charge displacement current generated by PD pulses. Besides the oscilloscope measurements, two types of electromagnetic field sensors (D-dot and B-dot) were developed to capture the EM fields of the PD pulses propagating through the TL. The main goal of this paper is to investigate the DC PD pulses through the EM fields and the corresponding discharge current pulses that are considered as calibrating signals for the developed D-dot and B-dot sensors. The results of DC cavity discharge measured by the constructed testbed and the EM field sensors demonstrate close agreement with the reference PD pulses measured via oscilloscope.

Explore related subjects

physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Mojtaba Rostaghi-Chalaki, Kamran Yousefpour, J. Patrick Donohoe, Mehmet Kurum, Chanyeop Park, Joni Kluss. 2020-07-12. Design of Transmission Line and Electromagnetic Field Sensors for DC Partial Discharge Analysis. https://arxiv.org/abs/2007.06017

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph↗

arXiv2026

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph↗

arXiv2026

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph↗