arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2007.01859

Improved flat-back 3D gadgets in origami extrusions completely downward compatible with the conventional pyramid-supported 3D gadgets

Mamoru Doi
View original source ↗Read source document ↗Export metadata ↓

Abstract

An origami extrusion is a folding of a 3D object in the middle of a flat piece of paper, using 3D gadgets which create faces with solid angles. In this paper we focus on 3D gadgets which create a top face parallel to the ambient paper and two side faces sharing a ridge, with two outgoing simple pleats, where a simple pleat is a pair of a mountain fold and a valley fold. There are two such types of 3D gadgets. One is the conventional type of 3D gadgets with a triangular pyramid supporting the two side faces from inside. The other is the newer type of 3D gadgets presented in our previous paper, which improve the conventional ones in several respects: They have flat back sides above the ambient paper and no gap between the side faces; they are less interfering with adjacent gadgets so that we can make the extrusion higher at one time; they are downward compatible with conventional ones if constructible; they have a modified flat-back gadget used for repetition which does not interfere with adjacent gadgets; the angles of their outgoing pleats can be changed under certain conditions. However, there are cases where we can apply the conventional gadgets while we cannot our previous ones. The purpose of this paper is to improve our previous 3D gadgets to be completely downward compatible with the conventional ones, in the sense that any conventional gadget can be replaced by our improved one with the same outgoing pleats, but the converse is not always possible. To be more precise, we prove that for any given conventional 3D gadget there are an infinite number of improved 3D gadgets which are compatible with it, and the conventional 3D gadget can be replaced with any of these 3D gadgets without affecting any other conventional 3D gadget. Also, we see that our improved 3D gadget keep all of the above advantages over the conventional ones.

Explore related subjects

cs.CGmath.MG

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mamoru Doi. 2020-07-02. Improved flat-back 3D gadgets in origami extrusions completely downward compatible with the conventional pyramid-supported 3D gadgets. https://arxiv.org/abs/2007.01859

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Unlabeled Multi-Robot Motion Planning with Improved Separation Trade-offs

We study unlabeled MRMP for unit-disk robots in a polygonal environment. Although the problem is hard in general, polynomial-time solutions exist under appropriate separation assumptions on start and target positions. Banyassady et al.(SoCG'22) guarantee feasibility in simple polygons under start--start and target--target distances of at least $4$, and start--target distances of at least $3$, but without optimality guarantees. Solovey et al.(RSS'15) provide a near-optimal solution in general polygonal domains, under stricter conditions: start/target positions must have pairwise distance at least $4$, and at least $\sqrt{5}\approx2.236$ from obstacles. This raises the question of whether polynomial-time algorithms can be obtained in even more densely packed environments. In this paper we present a generalized algorithm that achieve different tradeoffs on the robots-separation $ρ$ and obstacles-separation $ω$, all significantly improving upon the state of the art. Specifically, we obtain polynomial-time constant-approximation algorithms to minimize the total path length when (i) $ρ=2\frac{2}{3}$ and $ω=1\frac{2}{3}$, or (ii) $ρ\approx3.291$ and $ω\approx1.354$. These solutions are weakly-monotone; we also provide a monotone solution requiring $ω=\approx1.614$ and $ρ=4$. We prove that monotone plans may not exist when $ω<1.614$, and weakly-monotone plans may not exist when $ω<1.354$. We then present tradeoffs between the separation bounds and the approximation factor, specifically achieving an (almost) optimal bound of $ρ=2$ at the cost of a linear approximation factor and requiring $ω=2$. This applies also for the labeled variant of MRMP, in which case we show a tight bound on $ω$. Finally, we show that without any robots-separation assumption, obstacles-separation of at least $1.5$ may be necessary for a solution to exist.

cs.CG↗
arXiv2026

Low-Dimensional Embeddings for Gaussian Kernels on Manifolds

The Gaussian kernel is a widely used similarity measure underlying kernel methods such as kernel PCA and spectral clustering, but computing Gaussian kernel distances for many pairs of points can be expensive. Using Random Fourier Features (RFF), Chen and Phillips [ALT 2017] showed that for points in a $d$-dimensional Euclidean ball in ${\mathbb R}^N$, $t=Ω((d/\varepsilon^2)\log(dR/\varepsilon))$ features suffice to preserve all pairwise Gaussian kernel distances within a $(1\pm\varepsilon)$ factor with high probability. We establish a uniform relative-error embedding theorem for the more general setting of an arbitrary positive-reach submanifold $\mathcal M\subset{\mathbb R}^N$ of intrinsic dimension $d$. We show that $t=O((d/\varepsilon^2)\log(\operatorname{vol}(\mathcal M)^2N^{2d}/(\operatorname{vol}(B_1^d(0))^2\operatorname{rch}(\mathcal M)^{2d}\varepsilon^{2d+1}δ)))$, or approximately $O((d^2/\varepsilon^2)(\log N+\log(1/(\varepsilonδ))))$, RFFs suffice, with probability $1-δ$, to preserve the Gaussian kernel distance between every pair of manifold points up to relative error $\varepsilon$. Thus the bound depends only logarithmically on the ambient dimension and on manifold parameters such as volume and reach, while retaining the $1/\varepsilon^2$ Euclidean rate. We also prove a topological consequence: under the same RFF embedding, persistent homology is preserved in the sense that weighted Cech and Rips filtrations built from Gaussian kernel power distance are $(1\pm\varepsilon_\star)$-interleaved, where $\varepsilon_\star$ accounts for both distance distortion and kernel-weight approximation.

cs.CG↗
arXiv2026

Perfectly Guarding Straits: Exact Algorithms for Weak Visibility Polygons

The Art Gallery Problem (AGP) asks for the fewest guards that see all of a simple polygon. It is $\exists\mathbb{R}$-complete, hence NP-hard. We show that for a particular class of polygons, confining guards to a single edge makes AGP exactly and efficiently solvable. We call this the Strait Guarding Problem (SGP). Its input is a weak visibility polygon (WVP): a simple polygon where every point is seen from some point of one fixed edge, the base. SGP places the fewest guards on the base that jointly see the whole polygon. First, a structural fact: guards on the base edge that cover the boundary already cover the entire interior, turning a two-dimensional covering problem into a one-dimensional one. Our main result is the Witness-Guard Algorithm, which solves SGP exactly in $O((n + \mathrm{OPT} \cdot ρ)(\log n + \log \mathrm{OPT}))$ time, where $ρ$ is the number of reflex vertices in the WVP and OPT is the minimum number of guards. It is output-sensitive and certifies optimality by a witness set of size OPT derived from its output. We also study the guarding-the-vertex version and prove a tight $Θ(n \log n)$ bound, with the lower bound following from Sorting. As a corollary of SGP, we obtain two results for altitude terrain guarding (ATG), a special case that SGP generalizes. We give a linear-time perfect-guarding algorithm, improving the previous $O(n^2 \log n)$ bound of Daescu, Friedrichs, Malik, Polishchuk and Schmidt. We also resolve their problem on the minimum guarding altitude, in $O(nk + k^2 \log k)$ time, improving on the $O(k^2 λ_{k-1}(n) \log n)$ bound of Kang, Kim and Ahn.

cs.CG↗