arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2006.00270

Tribocorrosion under galvanic interaction of Ti6Al4V and NiCr implant alloys

Camila Dias dos Reis Barros·Janaina Cardozo Rocha·Ivan Napoleão Bastos·José Antônio da Cunha Ponciano Gomes
View original source ↗Read source document ↗Export metadata ↓

Abstract

Micromovements that occur in the joint between dental prostheses and implants can lead to wear-induced degradation. This process can be enhanced by corrosion in the oral environment influenced by the presence of solutions containing fluoride. Moreover, the eventual galvanic interactions between NiCr and Ti alloys can accelerate the wear-corrosion process. In this work, the tribocorrosion process of Ti6Al4V and NiCr alloys used in dental implant rehabilitations immersed in fluoride solutions at different pH values was investigated. The galvanic interaction effect between the alloys was also assessed. Tribocorrosion tests in corrosive media were performed with isolated Ti6Al4V and NiCr alloys, followed by testing with both alloys in contact. The media selected were based on fluoride concentrations and pH values that are possible to be found in oral environments. Analysis of the surfaces after the tribocorrosion tests was carried out using confocal laser microscopy. The wear profile and volume losses were determined by confocal measurements. It was concluded that the galvanic interaction between the alloys increased the tribocorrosion resistance of Ti6Al4V, compared with that of the isolated Ti6Al4V alloy. Ti6Al4V coupled with NiCr reduced the electrochemical potential decay during sliding. The increased resistance was explained by the electrochemical shift of the Ti6Al4V potential from active dissolution to the passive domain.

Explore related subjects

physics.app-phcond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Camila Dias dos Reis Barros, Janaina Cardozo Rocha, Ivan Napoleão Bastos, José Antônio da Cunha Ponciano Gomes. 2020-05-30. Tribocorrosion under galvanic interaction of Ti6Al4V and NiCr implant alloys. https://doi.org/10.1007/s40735-020-00415-1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

RCS angular control with gradient metasurfaces: design and measurement

This letter proposes the design and measurement of a periodic metasurface that achieves anomalous reflection with reduced RCS in a given parasitic direction. A previous study proposed a semi-analytical model to predict the RCS behavior of such a metasurface. However, this first study did not include any experimental exploration to verify the theoretical results. To complete this study, this work presents an experimental validation of the proposed design, with a focus on manufacturing and measurement issues. The synthesis, design specifications, fabrication method and experimental setup are presented and discussed. Measurement results are also examined in detail, highlighting some limitations in metasurfaces RCS measurements. The proposed metasurface effectively achieves the predicted RCS level reduction in the considered parasitic direction. The agreement between simulation and experimental results demonstrates the accuracy of the modelling and the efficiency of the optimisation procedure.

physics.app-ph↗
arXiv2026

Maximum-Power-Transfer Power Coordinates for Fully Coupled Multiport Thévenin Sources

A power-normalized scattering representation is developed at a fixed frequency for a passive linear time-invariant multiport load driven by a fully coupled multiport Thévenin source. The source is obtained by reducing, at the load reference planes, an independent-source network whose suppressed internal impedance is passive, together with an intervening passive matching network. No diagonal-reference, uncoupled-source-channel, reciprocity, or commutation assumption is required. With $R_s=\mathrm{Herm}\{Z_s\}\succ\mathbf{0}$, completing the square in accepted power identifies the available-power current and motivates the coordinates $\mathbf{a}=\frac12R_s^{-1/2}(\mathbf{V}+Z_s\mathbf{I})$, $\mathbf{b}=\frac12R_s^{-1/2}(\mathbf{V}-Z_s^H\mathbf{I})$. They satisfy $\|\mathbf{a}\|_2^2-\|\mathbf{b}\|_2^2=\Re\{\mathbf{I}^H\mathbf{V}\}$ and yield $\mathbf{S}=R_s^{-1/2}(Z_{load}-Z_s^H)(Z_{load}+Z_s)^{-1}R_s^{1/2}$. An exact operator identity establishes passivity--contractivity equivalence and gives excitation-specific, reachable-subspace, and complete conjugate-matching conditions. On the physically reachable incident subspace, singular values characterize the best- and worst-case source-normalized port-reflection TARC, while a restricted Frobenius norm gives the basis-averaged squared TARC. Equal-magnitude phase-only control is formulated separately as a constant-modulus problem, with generator-side constraints mapped through the coupled source network before power normalization. For antenna loads and excitations with $P_{acc}>0$, $P_{rad}/P_{av}=η_{rad}(1-\mathrm{TARC}^2)$, so terminal scattering data alone do not determine radiation efficiency. When $R_s$ is singular, finite available power exists exactly for $\mathbf{E}\in\mathrm{range}(R_s)$, and the construction applies on the positive-resistance support.

physics.app-ph↗
arXiv2026

Bimorph Lithium Niobate Thickness-Shear Overtone Film Bulk Acoustic Resonator

High quality factor ($Q$) and overtone operation enable narrow-linewidth acoustic devices with multiple discrete frequencies in a single cavity. Maintaining both high $Q$ and sufficient electromechanical coupling at higher mode orders remains challenging. Here, we demonstrate a bimorph periodically poled piezoelectric film (P3F) lithium niobate (LN) platform for high-order thickness-shear (TS) overtone excitation. The device comprises a bonded 80-$μ$m-thick single-crystal X-cut LN bimorph with opposite polarizations, patterned top and floating bottom electrodes, and a suspended air cavity. The P3F configuration mitigates charge cancellation from the alternating stress distribution of higher-order TS modes, enabling measurable coupling across a broad sequence of overtones. The thick LN acoustic cavity and increasingly confined high-order mode profiles support low-loss operation. Measured TS overtones extend to 1.75 GHz. At room temperature, representative overtones at 0.77 and 0.89 GHz exhibit 3-dB $Q$ values of 11,338 and 11,917, corresponding to $fQ$ products of $8.74\times10^{12}$ and $1.06\times10^{13}$ Hz, respectively. Cooling from 297 to 12 K systematically enhances $Q$, yielding a peak 3-dB $Q$ of 20,507 at 779 MHz and a maximum $fQ$ product of $1.98\times10^{13}$ Hz at 1.379 GHz. These results establish bimorph P3F LN as a promising platform for high-$Q$, frequency-scalable micro-acoustic resonators in the sub-GHz and low-GHz regimes.

physics.app-ph↗