arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1906.07428

An electrostatic in-line charge-state purification system for multicharged ions in the kiloelectronvolt energy range

Daniel Schury·Ajit Kumar·Alain Méry·Jean-Yves Chesnel·Anna Lévy·Stéphane Macé·Christophe Prigent·Jean-Marc Ramillon·Jimmy Rangama·Patrick Rousseau·Sébastien Steydli·Martino Trassinelli·Dominique Vernhet·Emily Lamour
View original source ↗Read source document ↗Export metadata ↓

Abstract

The performance of a newly built omega type electrostatic analyzer designed to act as an in-line charge-state purification system for ions in the keV energy range is reported. The analyzer consists of a set of four consecutive electrostatic 140{\deg} concentric cylindrical electrodes enclosed by Matsuda electrodes. This setup was recently tested and validated using $O^{5+}$ , $Ar^{9+}$ and $Xe^{20+}$ ion beams at an energy of 14 qkeV at the ARIBE facility. A resolving power of 10.5 and a transmission of 100 % of the desired charge state are measured allowing a good purification of incoming ion beams with charge states up to 10+ and a fairly good purification for charge states at least up to 20+. In comparison with other in-line solutions such as Wien filter, our system has the advantage of being purely electrostatic and therefore lacking common drawbacks as for example hysteresis.

Explore related subjects

physics.atom-ph

Keep this discovery

BibTeXRIS

Daniel Schury, Ajit Kumar, Alain Méry, Jean-Yves Chesnel, Anna Lévy, Stéphane Macé, Christophe Prigent, Jean-Marc Ramillon, Jimmy Rangama, Patrick Rousseau, Sébastien Steydli, Martino Trassinelli, Dominique Vernhet, Emily Lamour. 2019-06-18. An electrostatic in-line charge-state purification system for multicharged ions in the kiloelectronvolt energy range. https://doi.org/10.1063/1.5093407

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph↗
arXiv2026

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph↗
arXiv2026

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph↗