arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1905.01875

Formation and decay of eddy currents generated by crossed surface waves

V. M. Parfenyev·S. V. Filatov·M. Yu. Brazhnikov·S. S. Vergeles·A. A. Levchenko
View original source ↗Read source document ↗Export metadata ↓

Abstract

The mass-transport induced by crossed surface waves consists of the Stokes and Euler contributions which are very different in nature. The first contribution is a generalization of Stokes drift for a plane wave in ideal fluid and the second contribution arises due to the fluid viscosity and it is excited by a force applied in the viscous sublayer near the fluid surface. We study the formation and decay of the induced mass-transport theoretically and experimentally and demonstrate that both contributions have different time scales for typical experimental conditions. The evolution of the Euler contribution is described by a diffusion equation, where the fluid kinematic viscosity plays the role of the diffusion coefficient, while the Stokes contribution evolves faster, feeling the additional damping near the system boundaries. The difference becomes more pronounced if the fluid surface is contaminated. We model the effect of contamination by a thin insoluble liquid film presented on the fluid surface with the compression modulus being the only non-zero rheological parameter of the film. Then the Euler contribution into the mass-transport becomes parametrically larger and the evolution of the Stokes contribution becomes parametrically faster. The parameter is the same in both cases and it is equal to the quality factor of surfaces waves, which is modified by the presence of a surface film. We infer the value of the compression modulus of the film by fitting the results of transient measurements of eddy currents and demonstrate that the obtained value leads to the correct ratio of amplitudes of horizontal and vertical velocities of the wave motion and is in reasonable agreement with the measured dissipation rate of surface waves.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

V. M. Parfenyev, S. V. Filatov, M. Yu. Brazhnikov, S. S. Vergeles, A. A. Levchenko. 2019-10-06. Formation and decay of eddy currents generated by crossed surface waves. https://doi.org/10.1103/physrevfluids.4.114701

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Mathematical modeling on peristaltic flow of a Prandtl fluid with effects of slip conditions and inclined magnetic field

The manuscript provides a description of a theoretical analysis of a non-Newtonian Prandtl fluid subject to peristaltic flow through an inclined asymmetric channel. We explore the effect of an inclined magnetic field on the peristaltic flow. This is relevant for applications involving fluid flow in narrow, inclined (tilted) tubes similar to blood vessels or the digestive system. The model also includes thermodynamic aspects such as heat diffusion (the Soret effect) and viscous dissipation resulting from wall-fluid slip conditions, which may help optimize medical devices such as lab-on-a-chip systems and dialysis machines. In this study, the concentration of a generic chemical, temperature, and fluid velocity are taken into account through mass, heat, and momentum balances, respectively. The solution is approximated using numerical techniques suitable for long wavelengths (low frequency) and low Reynolds numbers. The study also discusses trapping phenomena, which are crucial from a clinical point of view. The developed insights can improve the understanding of physiological flows in the gastrointestinal tract and blood vessels. By understanding how the fluid moves and how particles are trapped, these insights may contribute to the design of improved medical pumps and artificial organs. Graphical visualizations are provided for the fluid velocity profile, temperature distribution, and concentration of a generic chemical. Furthermore, the numerical results are validated through comparison with a closed-form solution from a benchmark problem.

physics.flu-dyn↗
arXiv2026

Discovery of a dispersion model at high Peclet numbers

Peclet number characterises the transition from classical Taylor-Aris dispersion to convection-dominated longitudinal solute transport, with the classical model becoming inadequate at extremely high radial Peclet number $Pe_r$. We develop a novel explicit-closure one-dimensional (1-D) effective dispersion model for this high-$Pe_r$ regime by introducing two closure coefficients, $θ_u$ and $θ_d$, whose functional structures are identified using low-frequency transfer-function matching and a modified Kolmogorov-Arnold network (KAN). The resulting model captures the transition from classical Taylor-Aris dispersion at low $Pe_r$ to convection-dominated dispersion at high $Pe_r$. Analysis reveals that, in the high-$Pe_r$ regime, axial transport is redistributed between the effective convection flux and the dispersive flux, resulting in a reduced macroscopic convection velocity. Numerical validation demonstrates close agreement with the convection-diffusion model over the investigated high-$Pe_r$ conditions, while the classical Taylor-Aris model exhibits substantial deviations. Application of the proposed model to averaged flow velocity inversion further demonstrates improved velocity estimation, particularly in the high-$Pe_r$ regime. These results highlight the importance of accounting for non-classical dispersion for reliable contrast-agent-based arterial blood flow velocimetry and provide new insight into high-$Pe_r$ mass transport.

physics.flu-dyn↗
arXiv2026

Optimization of fluid mixing by reinforcement learning using limit cycles of a dynamical system

We propose a method to overcome the difficulties encountered when applying reinforcement learning to fluid mixing processes. The proposed method has two main features: (i) it does not require detailed measurements of the flow state, and (ii) by effectively exploiting a stable limit cycle of a two-dimensional dynamical system (the Li'enard system), it can stably perform optimization without imposing explicit constraints on the control parameters. As an illustrative example, we optimize a process in which a fluid contained in a cylindrical vessel is mixed by periodically rotating the vessel. The resulting optimal vessel motion is physically reasonable: it reverses its direction of rotation before a solid-body rotation state is established. Furthermore, even when the fluid viscosity increases with time during the mixing process, the method can continuously adapt the control parameters to the changing viscosity.

physics.flu-dyn↗