arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1902.02108

Seismogenic nodes as a viable alternative to seismogenic zones and observed seismicity for the definition of seismic hazard at regional scale

Paolo Rugarli·Franco Vaccari·Giuliano Panza
View original source ↗Read source document ↗Export metadata ↓

Abstract

It is shown that considering a fixed increment of a given magnitude at a fault is equivalent to factoring the mechanical moment at the fault as done in structural engineering with the applied loads, by the most currently used structural engineering standards (e.g. Eurocodes). A special safety factor is introduced and related to the partial factor acting on the mechanical moment representing the fault. A comparison is then made between the hazard maps obtained for Italy with the Neo Deterministic Seismic Hazard Assessment (NDSHA) technique, using two approaches for the definition of the seismic sources considered for the computation of the synthetic seismograms. The first one is based on the magnitude of the events listed in the earthquake catalogue, and located within the active seismogenic zones. This is the standard approach, used in most of the NDSHA computations performed up to now. It is adequate for countries, like Italy, where the catalogue can be reasonably considered complete for events of M=5 and above. When the catalogue completeness is barely adequate, another approach can be adopted for the definition of the earthquake sources. It uses the seismogenic nodes identified by means of pattern recognition techniques applied to morphostructural seismic zonation (MSZ), and increases the reference magnitude by a constant variation tuned thanks to the safety factor. The two approaches have been compared for Italy using the safety factor 2.0: they mostly produce comparable hazard maps. As the two sets are fully independent and the catalogue is very long, this implies a validation of the seismogenic nodes method and a tuning of the safety factor at about 2. Notable exception is seen in the Central Alps, where nodes tend to overestimate the "observed" hazard, and in southeastern Sicily, where the nodes underestimation is only apparent and can be negligible within experimental errors.

Explore related subjects

physics.geo-ph

Keep this discovery

BibTeXRIS

Paolo Rugarli, Franco Vaccari, Giuliano Panza. 2019-02-06. Seismogenic nodes as a viable alternative to seismogenic zones and observed seismicity for the definition of seismic hazard at regional scale. https://doi.org/10.15625/0866-7187/41/4/14233

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Holistic law of aftershocks

The paper is devoted to the phenomenological theory of aftershocks occurring in the source of a tectonic earthquake following the main shock. The theory was developed by the author jointly with A.D. Zavyalov and O.D. Zotov during the course of a long-term study of aftershocks. The theory is based on the concepts of source deactivation and the source's proper time. The holistic law governing the decay of aftershock activity over proper time follows from the theory. The damping decrement is equal to the source deactivation coefficient. The main focus of this paper is the analysis of the logical structure of the theory. The paper also contains a brief description of the experimental results obtained using the theory. Keywords: earthquake source, aftershocks, Omori's law, Utsu's law, deactivation coefficient, proper time, underground clock, foreshock convergence, aftershock divergence.

physics.geo-ph↗
arXiv2026

Bayesian deep learning integration of geophysical and drilling data for 3D prediction of copper mineralization and drill targeting: a case study from the Kogodai prospect, Rudny Altai

Exploration drill targeting in structurally complex terranes is hindered by sparse sampling, heterogeneous datasets, and the ambiguity of geophysical inversions. Here, we present an uncertainty-aware 3D workflow for the acceleration of time-to-discovery in brownfield explorations and apply it to the Kogodai prospect in the Rudny Altai metallogenic province. We jointly analyse existing drilling and geophysical data in a comprehensive approach, revealing hidden patterns in already available data. Drillholes and trenches were desurveyed to a common 3D reference frame, and assays were composited to a consistent spatial support to facilitate joint modelling with geophysical inputs. We develop Bayesian deep-learning models to predict 3D fields of Cu grade together with chargeability and apparent resistivity while quantifying epistemic uncertainty via Monte Carlo sampling. The original contribution of this work is to treat the problem not as pointwise regression between co-located observations, but as joint learning of spatially continuous 3D fields from sparse, heterogeneous exploration evidence. The resulting 3D predictions delineate a principal mineralized trend and several localized candidate zones that coincide with elevated induced polarization (IP) responses, while uncertainty mapping highlights where predictions are robust versus where additional drilling would be most informative. The continuous Cu-grade field can also be thresholded to produce binary prospectivity maps, allowing the sensitivity of target delineation to the chosen cutoff to be evaluated. The outputs are intended for qualitative interpretation and risk-aware drill targeting rather than resource estimation, and we discuss key limitations arising from incomplete provenance metadata for geophysical products and heterogeneity of historical sampling.

physics.geo-ph↗
arXiv2026

PyelogP: Automated Energy-Based Determination of Preconsolidation Pressure in Clay Deposits

Estimating the preconsolidation pressure ($\sigma'_p$) from one-dimensional consolidation (oedometer) tests is critical in geotechnical engineering for settlement analysis. Traditional graphical methods, such as the Casagrande procedure, may introduce uncertainties, particularly when interpreting rounded $e$-log($P$) curves typical of disturbed specimens of soft clays and silt deposits. This paper introduces PyelogP, an open-source Python library designed to calculate $\sigma'_p$ using the strain-energy method proposed by Becker et al. (1987) as an automated and reproducible alternative. The algorithm combines natural cubic spline interpolation, knee-point detection via the Kneedle algorithm, and split-point linear regression within the work-pressure space. Physically informed thresholds, including overconsolidation ratio limits and second-derivative maxima (${d^2 e}/{d(\log \sigma')^2}$), are incorporated to establish pre-yield and post-yield fitting boundaries. The performance of PyelogP is evaluated against a suite of 22 experimental consolidation datasets covering various clay deposits, including Saint-Alban clay and San Francisco Old Bay Clay. The results demonstrate strong agreement with the published values ($R^2$ = 0.912, RMSE = 0.374, MBE = -0.080), while the $O(N^2)$ algorithm requires only a few milliseconds per curve for typical oedometer datasets and less than 150 milliseconds for the largest datasets.

physics.geo-ph↗