arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1901.11104

Optimal Sensor Placement for Topology Identification in Smart Power Grids

Ananth Narayan Samudrala·Hadi Amini M.·Soummya Kar·Rick Blum
View original source ↗Read source document ↗Export metadata ↓

Abstract

Accurate network topology information is critical for secure operation of smart power distribution systems. Line outages can change the operational topology of a distribution network. As a result, topology identification by detecting outages is an important task to avoid mismatch between the {topology that the operator believes is present and the actual topology}. Power distribution systems are operated as radial trees and are recently adopting the integration of sensors to monitor the network in real time. In this paper, an optimal sensor placement solution is proposed that enables outage detection through statistical tests based on sensor measurements. Using two types of sensors, node sensors and line sensors, we propose a novel formulation for the optimal sensor placement as a cost optimization problem with binary decision variables, i.e., {to place or not place a sensor at each bus/line}. The advantage of the proposed placement strategy for outage detection is that it incorporates various types of sensors, is independent of load forecast statistics and is cost effective. Numerical results illustrating the placement solution are presented.

Explore related subjects

eess.SYcs.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ananth Narayan Samudrala, Hadi Amini M., Soummya Kar, Rick Blum. 2019-01-30. Optimal Sensor Placement for Topology Identification in Smart Power Grids. https://arxiv.org/abs/1901.11104

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models

Orbit prediction and space situational awareness require accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude. Physics-based general circulation models resolve that response but are computationally expensive, while empirical models run cheaply and carry no time-evolving atmospheric state. An autoregressive Sparse Identification of Nonlinear Dynamics with control (SINDyc-AR) model, derived from the Thermosphere-Ionosphere-Electrodynamics General Circulation Model (TIE-GCM), captures the dominant modes of variability and their dependence on the drivers at a fraction of the parent model's cost. An extended Kalman filter assimilates in situ observations from CHAMP, GRACE, GRACE-FO, GOCE, and Swarm into that model across several orbital configurations and geomagnetic conditions, with a linear DMDc model as reference. Assimilation reduces density error relative to open-loop prediction, most visibly during geomagnetic storms and under single-satellite coverage. The two reduced-order models perform comparably throughout. NRLMSIS 2.1 and HASDM can outperform the assimilated model far from the assimilated track, so results are framed as improvements over the open-loop forecast. An observation-calibrated global density record spanning August 2000 to December 2025 is released alongside this work.

eess.SY↗
arXiv2026

Joint Spectrum and Airspace Resource Optimization for Low-altitude Wireless Network

Low-altitude wireless networks have emerged as a promising platform for enabling the safe and efficient operation of unmanned aerial vehicles (UAVs). However, due to the limited spectrum and airspace resources, it is challenging to efficiently accomplish UAV flight tasks without collisions. In this paper, we propose a sequential framework with two coupled stages that coordinates spectrum allocation and airspace planning to construct efficient low-altitude air corridors. Specifically, the low-altitude airspace is discretized into a set of digital grids, where obstacles are modeled as impermeable units. Then, we formulate an optimization problem to minimize the total traversal cost of air corridors, which is challenging to solve due to the tight coupling between spectrum allocation and path planning.Therefore, we first design a constrained Vickrey-Clarke-Groves (VCG) ascending auction mechanism to allocate the spectrum resources. Then, we propose a joint spectrum and airspace resource allocation algorithm to minimize the total traversal cost of air corridors. Finally, simulation results show that the proposed algorithms achieve lower total costs than the baseline algorithms.

eess.SY↗
arXiv2026

IMU-Centric Moving Horizon Estimation for Lateral Dynamics Estimation Across Vehicles and Grip Conditions

Accurate estimation of lateral vehicle dynamics near the adhesion limit is important for stability control and high-performance driving, but lateral velocity is rarely measured directly because sensors such as optical sensors are costly. This paper presents an inertial measurement unit (IMU)-centric Moving Horizon Estimation framework that reconstructs lateral velocity using standard onboard signals, without relying on exteroceptive odometry or detailed tire-parameter tuning. Experimental validation on human-driven sports cars and an autonomous open-wheel race car across tracks, maneuvers, and conditions demonstrates accurate and robust lateral velocity and lateral acceleration estimates. The proposed framework is available at https://github.com/Aseuffo/IMU-Centric-MHE

eess.SY↗