Treating Wavefront Measurement Error in Estimation of Non-Common Path Aberration for Direct Imaging of Exoplanets

Abstract

One of the major difficulties limiting ground-based direct imaging of exoplanets with adaptive optics is quasi-static speckles in the science camera (SC) that obscure the planetary image. These speckles are caused by aberrations, called non-common path aberrations (NCPA), that are not corrected in the adaptive optics loop, and all attempts to subtract them in post-processing have been problematic. The method of Frazin (2013) (F13) uses simultaneous millisecond telemetry from wavefront sensor (WFS) and the SC to estimate the both the NCPA and the exoplanet image in a self-consistent manner. Rodack et al. (2018) proposed correcting for the NCPA in real-time while on-sky using the F13 estimation method, and called this procedure the "Real-Time Frazin Algorithm." The original regression model underlying the F13 method did not account for uncertainty in the WFS measurements, and this cannot be done with standard statistical methodology since these uncertainties manifest themselves in the independent variables (i.e., they cannot be treated as another source of noise in the SC data). Further, simulations show that simply using the noisy wavefront measurements without accounting for their uncertainties leads to estimates of the NCPA with unacceptably large bias. Here, the source of this bias is explained in terms of an "errors in variables" statistical model. Then, the method of F13 is generalized to account for WFS measurement error using a new sequential estimation technique that treats the nonlinear coupling between NCPA, WFS measurements and the error covariance of the WFS measurements. This new technique keeps a running estimate of the NCPA, the exoplanet image and their joint covariance matrix. The sequential implementation of the method should make it computationally efficient enough to be suitable for on-sky correction of the NCPA as well as off-line analysis.