arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1811.01860

A micro channel-cut crystal X-ray monochromator for a self-seeded hard X-ray free-electron laser

Taito Osaka·Ichiro Inoue·Ryota Kinjo·Takashi Hirano·Yuki Morioka·Yasuhisa Sano·Kazuto Yamauchi·Makina Yabashi
View original source ↗Read source document ↗Export metadata ↓

Abstract

A channel-cut Si(111) crystal with a channel width of 90 $\mu$m was developed for achieving reflection self-seeding in hard X-ray free-electron lasers (XFELs). With the crystal, a monochromatic seed pulse is produced from a broadband XFEL pulse generated in the first-half undulators with an optical delay of 119 fs at 10 keV. The small optical delay allows a temporal overlap between the seed optical pulse and the electron bunch by using a small magnetic chicane for the electron beam at the middle of the undulator section. A peak reflectivity reached 67%, which is a reasonable value as compared with the theoretical one of 81%. By using this monochromator, a monochromatic seed pulse without broadband background in spectrum was obtained at SACLA with a conversion efficiency from a broadband XFEL pulse of $\sim 2 \times 10^{-2}$, which is $\sim 10$ times higher than that of transmission self-seeding using a thin diamond (400) monochromator.

Explore related subjects

physics.ins-detphysics.optics

Keep this discovery

BibTeXRIS

Taito Osaka, Ichiro Inoue, Ryota Kinjo, Takashi Hirano, Yuki Morioka, Yasuhisa Sano, Kazuto Yamauchi, Makina Yabashi. 2018-10-31. A micro channel-cut crystal X-ray monochromator for a self-seeded hard X-ray free-electron laser. https://arxiv.org/abs/1811.01860

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗