Lattice Boltzmann modeling of two-phase flow in macroporous media with application to porous asphalt

Soyoun Son

Home/Archive/arXiv

arXiv · 1804.02415

Lattice Boltzmann modeling of two-phase flow in macroporous media with application to porous asphalt

Soyoun Son

View original source ↗Read source document ↗Export metadata ↓

Abstract

Porous asphalt (PA) is an open-graded porous material with a porosity of 20%, allowing fast drainage of rain and improving driving and acoustic conditions. However, the high porosity leads to significant contact with water resulting in a shorter life expectancy. To improve the durability and performance of PA, the distribution of water and its residence time have to be understood which entails capturing diverse multiphase phenomena. For these reasons, a numerical study is performed to analyze in detail the fluid transport mechanisms at play in PA, towards estimating the liquid distribution inside the nanometer- to millimeter-sized pore structure of PA. In this study, LBM is used for a detailed analysis of multiphase flow in complex porous domains. A multiphase single component LBM method, with parallel computing, has been developed different phase separation phenomena on surfaces and in porous media. The LBM is validated with Laplace law and dynamic capillary intrusion test and then the capillary uptake simulations are validated with analytical solutions, varying contact angles, tube shapes and sizes. Pore meniscus and corner arc menisci are studied in both square and triangular tubes. In order to address the behavior of rain droplets on a PA surface, run-off, wetting, pinning and evaporation of single droplet are considered in terms of effects of variation of contact angle, surface wetting heterogeneity and structure. Finally, gravity-driven drainage in PA is studied with LBM in accordance with temporal evolution of water distribution by comparing with experimental data, showing good agreement. This study allows a better understanding of the diverse multiphase flow phenomena occurring in complex porous media, namely PA, at pore scale in saturated and unsaturated states, providing information towards improving the durability and performance of PA.

Explore related subjects

physics.flu-dyn cond-mat.soft physics.comp-ph

Keep this discovery

BibTeX RIS

Soyoun Son. 2018-04-06. Lattice Boltzmann modeling of two-phase flow in macroporous media with application to porous asphalt. https://arxiv.org/abs/1804.02415

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗