arXiv ScienceSearch

arXiv · 1801.10471

Optimization of the beam crossing angle at the ILC for e+e- and gamma-gamma collisions

Abstract

At this time, the design of the International Linear Collider (ILC) is optimized for e+e- collisions; the photon collider (gamma-gamma and gamma-electron) is considered as an option. Unexpected discoveries, such as the diphoton excess F(750 GeV) seen at the LHC, could strongly motivate the construction of a photon collider. In order to enable the gamma-gamma collision option, the ILC design should be compatible with it from the very beginning. In this paper, we discuss the problem of the beam crossing angle. In the ILC technical design, this angle is 14 mrad, which is just enough to provide enough space for the final quadrupoles and outgoing beams. For gamma-gamma collisions, the crossing angle must be larger because the low-energy electrons that result from multiple Compton scattering get large disruption angles in collisions with the opposing electron beam and some deflection in the solenoidal detector field. For a 2E=500 GeV collider, the required crossing angle is about 25 mrad. In this paper, we consider the factors that determine the crossing angle as well as its minimum permissible value that does not yet cause a considerable reduction of the gamma-gamma luminosity. It is shown that the best solution is to increase the laser wavelength from the current 1 \mum (which is optimal for 2E=500 GeV) to 2 \mum as this makes possible achieving high gamma-gamma luminosities at a crossing angle of 20 mrad, which is also quite comfortable for e+e- collisions, does not cause any degradation of the e+e- luminosity and opens the possibility for a more energetic future collider in the same tunnel (e.g., CLIC). Moreover, the 2 \mum wavelength is optimal for a 2E = 1 TeV collider, e.g., a possible ILC energy upgrade. Please consider this paper an appeal to increase the ILC crossing angle from 14 to 20 mrad.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

V. I. Telnov. 2018-02-27. Optimization of the beam crossing angle at the ILC for e+e- and gamma-gamma collisions. https://doi.org/10.1088/1748-0221%2F13%2F03%2Fp03020

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Approximate solution of an adapted Bethe transport equation for electron scattering in foils

A new semi-analytical model for electron scattering in foils is presented valid for thin foils and electron-beam kinetic energies up to roughly $100$ keV and from 20 keV at a dimensionless foil thickness of $20$, and higher energies for thinner foils. To perform calculations, an approximate solution is constructed by Hankel transforms of an adapted Bethe transport equation for electron scattering. The Wentzel differential cross section is used in the Bethe transport Eq. and resulting integrals are solved analytically or approximated. These approximate solutions of the transport Eq.'s were compared to the Goudsmit-Saunderson solutions in gold, for thin samples with dimensionless thicknesses $λ=5,10,20$. We also compare to the Kawrakow \cite{Kawr} model, which uses the small angle approximation. We show that in the regime of $20$ to $100$ keV beam energies, our model performs better than Kawrakow's model and this is opposite above about 100 keV. Exactly, some angularly distributed beams and the influence of energy loss of the beam can be simulated with our model.

physics.acc-ph

Reconstruction of Beam Transverse Parameters in the Fermilab Side-Coupled Linac Using a Normalized Coordinate Framework

Quadrupole scans are a commonly used tool for beam second moment reconstruction. Limitations in the strength of the magnets and layout of the beamline elements frequently preclude simple quadrupole-drift-detector scans from collecting sufficient data for reconstruction. Using a normalized coordinate framework, we characterize the prerequisites for a robust simple quadrupole scan and expand these prerequisites to reconstruction from more complex optics. The beam second moments are investigated at two locations in the Fermilab Side-Coupled Linac under simple and complex optics, using this framework to maximize information gained from wire scanner profile measurements.

physics.acc-ph

Impedance of multilayer cylindrical structures with a material-filled beam region

Beam-coupling impedances in material media are relevant for ionization-cooling channels of a future muon collider, where the beam propagates in matter rather than vacuum. We extend the cylindrical field-matching formalism for multilayer structures to the case of a material-filled beam region surrounded by external layers with arbitrary electromagnetic properties. Relative to the vacuum formulation, the usual factor $1/γ^2$ is replaced by the material-dependent factor $F=1/\varepsilon_1-μ_1β^2$, and the radial propagation constant is modified accordingly. Analytical expressions are obtained for the monopolar longitudinal and dipolar transverse impedances, with the surrounding structure encoded through reflection coefficients determined by field matching. The formalism reduces to the known vacuum and perfectly conducting limits in the appropriate cases. Representative calculations are presented for absorber-relevant configurations, illustrating the dependence on the material properties of both the beam region and the surrounding layers. In particular, a finite beam-region conductivity can generate a real impedance component and reverse the sign of the imaginary space-charge impedance, while sufficiently high permittivity can give rise to resonant structures associated with oscillatory radial fields. The effect of finite-conductivity surroundings is also examined, showing the approach towards the perfectly conducting limit as the external conductivity is increased. The applicability of the infinite-length approximation is also discussed by comparison with finite-length mode-matching results.

physics.acc-ph