arXiv ScienceSearch

arXiv · 1705.07588

Predictions of homogeneous nucleation rates for $n$-alkanes accounting for the diffuse phase interface and capillary waves

Abstract

Homogeneous droplet nucleation has been studied for almost a century but has not yet been fully understood. In this work, we used the density gradient theory (DGT) and considered the influence of capillary waves (CW) on the predicted size-dependent surface tensions and nucleation rates for selected $n$-alkanes. The DGT model was completed by an equation of state (EoS) based on the perturbed-chain statistical associating fluid theory (PC-SAFT) and compared to the classical nucleation theory and the Peng--Robinson EoS. It was found that the critical clusters are practically free of CW because they are so small that even the smallest CW wavelengths do not fit into their finite dimensions. The CW contribute to the entropy of the system and thus decrease the surface tension. A correction for the effect of CW on the surface tension is presented. The effect of the different EoSs is relatively small because by a fortuitous coincidence their predictions are similar in the relevant range of critical cluster sizes. The difference of the DGT predictions to the classical nucleation theory computations is important but not decisive. Of the effects investigated, the most pronounced is the suppression of the CW which causes a sizable decrease of the predicted nucleation rates. The major difference between experimental nucleation rate data and theoretical predictions remains in the temperature dependence. For normal alkanes, this discrepancy is much stronger than observed, e.g., for water. The theoretical corrections developed here have a minor influence on the temperature dependency. We provide empirical equations correcting the predicted nucleation rates to values comparable with experiments.

Explore related subjects

Keep this discovery

BibTeXRIS

Barbora Planková, Václav Vinš, Jan Hrubý. 2017-05-22. Predictions of homogeneous nucleation rates for $n$-alkanes accounting for the diffuse phase interface and capillary waves. https://doi.org/10.1063/1.5008612

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

A Geometrically Parameterized Quasi-Stationary 3D Model for High-Frequency Induction Tube Welding

A three-dimensional multiphysics finite element framework for the simulation of high-frequency induction welding of tubes is presented. The model couples a time-harmonic magnetic scalar potential formulation with a stabilized quasi-stationary advection-diffusion heat transport equation, enabling accurate prediction of electromagnetic and thermal fields under industrial operating conditions. The framework incorporates parameterized geometry generation and semi-automated, physics-tailored mesh construction and is implemented using the open-source tools GetDP and Gmsh. Validation against measurements from a commercial induction welding line for AISI 304 stainless steel tubes demonstrates good agreement with operating data. The validated model is subsequently applied to investigate the influence of impeder material by comparing a conventional FeNiZnV ferrite with the soft magnetic composite Ferrotron 559H for the induction welding of AISI 304 stainless steel tubes.

physics.comp-ph

Stress-Testing Dynamical and Generative Downscaling Using Subseasonal Extreme Precipitation Forecasts

Coarse spatial resolution limits the ability of subseasonal prediction models to resolve extreme precipitation. Downscaling with either dynamical or deep generative models can overcome this issue, but the comparative performance of these models for extremes across different atmospheric regimes remains poorly understood. In this work, we evaluate the Weather Research and Forecasting (WRF) model against a diffusion-based generative model by downscaling two physically distinct, extreme precipitation events up to lead times of 3 weeks. For a fair comparison with WRF, which can downscale boundary conditions from different driving models without model-specific training, the diffusion model is trained in an unpaired fashion. Both approaches improve upon the raw European Centre for Medium-Range Weather Forecasts forecasts, in comparison to fused rain gauge-radar observations in Switzerland (CombiPrecip), but exhibit regime-dependent strengths. WRF achieves the highest probabilistic skill for a multicell, non-stationary event. Conversely, the diffusion model is more consistent across different performance metrics for the two events, outperforming WRF in a more stationary supercell event. These results demonstrate that explicit dynamical modeling can add value for specific precipitation events for subseasonal lead times, and that generative downscaling adds value more broadly in different situations.

physics.comp-ph

Nonlinear flame describing function and mean shift kinematics of slit flames under combined axial-transverse forcing

This study investigates the nonlinear kinematics of a premixed slit flame using a two-dimensional $G$-equation level-set framework. Results show that combined forcing induces nonlinear saturation in the FDF, characterized by early gain flattening and premature phase drops, which intensify with the transverse forcing amplitude. Kinematic analysis reveals that this geometric nonlinearity manifests as a reduction in the time-averaged flame height, defined as the mean shift. In the quasi-steady limit, this mean shift is analytically quantified via a multivariate asymptotic expansion, where fourth-order terms successfully capture the saturation mechanism at elevated amplitudes. By introducing a scaling parameter to account for transverse dominance, the frequency-dependent decay of the mean shift in the compact limit collapses onto a single master curve, enabling the derivation of a unified theoretical model that integrates this asymptotic response with a second-order low-pass filter. Furthermore, because the mean shift reduces the physical extent of the flame, it alters the wrinkle propagation time. Correcting the Strouhal number using the measured mean shift collapses the dispersed nonlinear FDF curves onto the linear theory prediction. The analysis is further extended to disturbances convected at a finite speed, for which the linear transfer function is derived analytically and the correction with the measured mean shift continues to collapse the nonlinear FDF. These findings establish that the nonlinear FDF behavior under multidimensional forcing is fundamentally governed by the kinematic mean shift, providing a theoretical baseline for decoupling geometric nonlinearities from other thermo-diffusive or hydrodynamic instabilities in turbulent flames.

physics.comp-ph