arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1511.00640

Thermogravitational cycles: theoretical framework and example of an electric thermogravitational generator based on balloon inflation/deflation

Kamel Aouane·Olivier Sandre·Ian J. Ford·Tim P. Elson·Christopher Nightingale
View original source ↗Read source document ↗Export metadata ↓

Abstract

Several studies have combined heat and gravitational energy exchanges to create novel heat engines. A common theoretical framework is developed here to describe thermogravitational cycles which have the same efficiencies as the Carnot, Rankine or Brayton cycles. Considering a working fluid, enclosed in a balloon, inside a column filled with a transporting fluid, the cycle is composed of four steps. Starting from the top of the column, the balloon goes down by gravity, receives heat from a hot source at the bottom, rises and delivers heat to a cold source at the top. Unlike classic power cycles which need external work to operate the compressor, thermogravitational cycles can operate as "pure power cycle" where no external work is provided to drive the cycle. To illustrate this concept, the prototype of a thermogravitational electrical generator is presented. It uses a hot source of low temperature (average temperature near 57°C) and relies on the gravitational energy exchanges of an organic fluorinated fluid inside a balloon attached to a magnetic marble producing an electromotive force of 50 mV peak to peak by the use of a linear alternator. This heat engine is well suited to be operated using renewable energy sources such as geothermal gradients or focused sunbeams.

Explore related subjects

physics.gen-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kamel Aouane, Olivier Sandre, Ian J. Ford, Tim P. Elson, Christopher Nightingale. 2017-01-02. Thermogravitational cycles: theoretical framework and example of an electric thermogravitational generator based on balloon inflation/deflation. https://doi.org/10.3390/inventions3040079

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Canonical quantization of the complex scalar field without making use of its real and imaginary parts

We proceed to the canonical quantization of the complex scalar field without making use of its real and imaginary parts. Our motivation is to formally connect, as tightly as possible, the quantum-field notions of particle and antiparticle$\unicode{x2014}$most prominently represented, formally, by creation and annihilation operators$\unicode{x2014}$to the initial classical field theory$\unicode{x2014}$whose main formal object is the field amplitude at a given spacetime point. Our point of view is that doing this via the use of the real and imaginary parts of the field is not satisfying. The derivation demands to consider, just before quantization, the field and its complex conjugate as independent fields, which yields a system of two copies of independent complex scalar fields. One then proceeds to quantization with these two copies, which leads to the introduction of two families of creation and annihilation operators, corresponding to particles for the creation operators, and to antiparticles for the annihilation operators. One realizes that having two such families is the only hope for being able to "invert" the definitions of the creation and annihilation in terms of the Fourier quantized fields, so as to finally obtain an expression of the direct-space fields in terms of these creation and annihilation operators, because the real-field condition used in the case of a real scalar field does not hold for a complex scalar field. This final goal is then met by introducing the complex-conjugate constraint at the quantum level, that is, that the second independent field copy is actually the complex conjugate of the first. All derivations are led in a rigorous, and in particular purely deductive way, and all standard results are recovered that way. While we reckon our derivation exists in the literature, we have not found it.

physics.gen-ph↗
arXiv2026

Pinched Multi Affine Geometry and Confinement: Describing the Yang-Mills Mass Gap

We give physical gap certificates for regulated Yang-Mills Hamiltonians and conditional continuum-transfer criteria. At fixed spatial cutoff, the physical $SU(3)$ Hamiltonian has a volume-independent gap of at least $8a/3$ for magnetic/electric ratio $b/a\le1/648$, with a thermodynamic ground state and a surviving finite-energy Wilson excitation. Its centered two-point autocorrelations have positive spectral representations; on the stated periodic cubes, every positive magnetic coupling gives the elementary plaquette at least two active energies. Quantum relative entropy identifies the physical energy form, while exact elimination retains the dynamical memory of discarded modes. We derive volume- and exterior-uniform vacuum score bounds, construct compatible finite hierarchies, and give summability and spectral-tightness criteria for limiting dynamics and surviving observables. Pinching motivates a conditional tube-energy balance; its use for an infrared gap requires uniform comparison with the complete vacuum-subtracted quantum energy after relaxation, including control of local low modes and localization errors. The remaining inputs include uniform infrared and shell estimates, local vacuum comparison rates, and relativistic field reconstruction. The interacting four-dimensional construction, nontrivial renormalized local fields and a uniform physical mass gap remain unproved.

physics.gen-ph↗
arXiv2026

GLLH EM Invisible Cloak With Novel Front Branching And Without Exceeding Light Speed Violation

In this paper, for the first time in the world, we propose a new electromagnetic (EM) cloak without superluminal propagation and without time delay. Using Global and Local (GL) electromagnetic non-scattering modeling and inversion with a distinctive class of materials a_{αβ}\log ^α(b_{αβ}/h) h^β(GLLH Cloak), the named GLLH invisible cloak is developed in arXiv:1005.3999V1 in 2010. After 16 years, this paper is version 3 of arXiv:1005.3999V1 . The refractive index of the GLLH cloak material is greater than or equal to one. Spherical harmonic analysis and the GL modeling and inversion method are used to simulate the electromagnetic wave propagation through the GLLH cloak without superluminal effects and without time delay. The novel EM wave propagation and front branching in the GLLH cloak obtained by GL EM modeling are presented. Find an invisible cloak is the non scattering problem. Using Global and Local (GL) electromagnetic non-scattering modeling and inversion with a distinctive class of materials is one method in our paper in arXiv:1005.3999V1 in 2010. Another method is some 0 to R1 radial coordinate transformations with superluminal and infinite phase velocity. From the GLLH invisible cloak, we discovered positive space and negative space and invisible science. Using a new negative infinity to 0 quasi topological transformation, we discovered new isotropic electromagnetic invisible GLHUA sphere; anisotropic electromagnetic invisible GLHUA cloak. In the GLLH cloak, the wave front is curved as a crescent like and without superluminal and time delay. Open question: Can we construct a 3D Kakeya set where line segments of length represent the vector field of EM wave ray-tracing propagation through GLLH, GLHUA cloaks, and the GLHUA sphere? All copyright and patent of the GLLH EM cloaks and GL modeling and inversion methods are reserved by authors.

physics.gen-ph↗