arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1509.05362

A study of M1/M2 phase cooperation in the MoV(Te,Sb)(Nb,Ta)O catalysts for propane ammoxidation to acrylonitrile

Jungwon Woo·Urvi Sanghavi·Anne Vonderheide·Vadim V. Guliants
View original source ↗Read source document ↗Export metadata ↓

Abstract

The bulk mixed MoV(Te,Sb)(Nb,Ta)O catalysts containing nanoscale intergrowths of so-called M1 and M2 phases display uniquely high reactivity in propane ammoxidation to acrylonitrile associated with the surface ab planes of the M1 phase. The current controversy surrounding this catalytic system is focused on the role of the M2 phase, which is unable to activate propane but was suggested in some studies to function in synergy with the M1 phase by efficiently converting the propylene intermediate to acrylonitrile. The present study systematically examined the catalytic behavior of pure M1 phases prepared by selective dissolution of the M2 phase in MoV(Te,Sb)(Nb,Ta)O catalysts in aqueous hydrogen peroxide. It confirmed that the MoV(Te,Sb)(Nb,Ta)O M1 phases are highly active and selective for propane and propylene ammoxidation, while the MoV(Te,Sb)(Nb,Ta)O M2 phases were active and selective in propylene ammoxidation only. Most importantly, the kinetic study of the MoV(Te,Sb)(Nb,Ta)O M1 and M2 phases in propylene ammoxidation revealed for the very first time that that the M2 phases are significantly less active than the M1 phase in propylene ammoxidation. The findings of this study do not support the existence of the synergy effect for any M1/M2 compositional variant. Instead, the observed behavior of MoV(Te,Sb)(Nb,Ta)O catalysts was consistent with partial loss of some surface active species from the M1 phase surface during the H2O2 treatment and generation of fresh ab planes of the M1 phase via mechanical grinding of the H2O2-treated M1 phase. These findings provided further evidence that the M1 phase is the only phase required for the activity and selectivity of the MoV(Te,Sb)(Nb,Ta)O catalysts in propane ammoxidation to ACN.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Jungwon Woo, Urvi Sanghavi, Anne Vonderheide, Vadim V. Guliants. 2015-09-17. A study of M1/M2 phase cooperation in the MoV(Te,Sb)(Nb,Ta)O catalysts for propane ammoxidation to acrylonitrile. https://arxiv.org/abs/1509.05362

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗