arXiv ScienceSearch

arXiv · 1504.06950

Purcell effect in Hyperbolic Metamaterial Resonators

Abstract

The radiation dynamics of optical emitters can be manipulated by properly designed material structures providing high local density of photonic states, a phenomenon often referred to as the Purcell effect. Plasmonic nanorod metamaterials with hyperbolic dispersion of electromagnetic modes are believed to deliver a significant Purcell enhancement with both broadband and non-resonant nature. Here, we have investigated finite-size cavities formed by nanorod metamaterials and shown that the main mechanism of the Purcell effect in these hyperbolic resonators originates from the cavity hyperbolic modes, which in a microscopic description stem from the interacting cylindrical surface plasmon modes of the finite number of nanorods forming the cavity. It is found that emitters polarized perpendicular to the nanorods exhibit strong decay rate enhancement, which is predominantly influenced by the rod length. We demonstrate that this enhancement originates from Fabry-Perot modes of the metamaterial cavity. The Purcell factors, delivered by those cavity modes, reach several hundred, which is 4-5 times larger than those emerging at the epsilon near zero transition frequencies. The effect of enhancement is less pronounced for dipoles, polarized along the rods. Furthermore, it was shown that the Purcell factor delivered by Fabry-Perot modes follows the dimension parameters of the array, while the decay rate in the epsilon near-zero regime is almost insensitive to geometry. The presented analysis shows a possibility to engineer emitter properties in the structured metamaterials, addressing their microscopic structure.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alexey P. Slobozhanyuk, Pavel Ginzburg, David A. Powell, Ivan Iorsh, Alexander S. Shalin, Paulina Segovia, Alexey V. Krasavin, Gregory A. Wurtz, Viktor A. Podolskiy, Pavel A. Belov, Anatoly V. Zayats. 2015-04-27. Purcell effect in Hyperbolic Metamaterial Resonators. https://doi.org/10.1103/physrevb.92.195127

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Rubidium referenced Kerr comb with cavity phase matching

Phase matching is a fundamental problem in nonlinear optics that is normally constrained by material dispersion. The limited operation wavelengths within phase matching window limits the application, including the precise metrology using Kerr combs. Demanding applications like compact optical clock and astronomical spectroscopy requires atomic reference around 800 nm, where the natural phase matching is challenging. Here we revisit the concept of cavity phase matching (CPM), and fully reveal its advantage to engineer artificial phase matching beyond material dispersion. With the access of CPM condition in a monolithic high-Q fiber Fabry-Pérot resonator featuring a macroscopic cavity length, we achieve low noise Kerr comb generation around 800 nm, within the power budget of a single-mode laser diode. Inside a pump-integrated package of 19 cm3, low phase noise of -125 dBc/Hz at 100 kHz offset frequency is achieved for a 10.1 GHz repetition rate. Most importantly, the generated Kerr comb has been directly referenced to rubidium atomic transition for long-term stable operation. This result not only opens a new way for Kerr comb generation at arbitrary wavelengths, but also can be generalized to any other nonlinear optical frequency conversion application.

physics.optics

Mid-infrared reconfiguration of population flow in lanthanide nanocrystals

Converting mid-infrared (MIR) radiation to visible or near-infrared wavelengths is essential for imaging and sensing, yet achieving sensitive, low-power, and scalable detection remains challenging. Lanthanide nanocrystals provide an alternative through ratiometric luminescence but are typically constrained by Boltzmann statistics, which tie population distributions to lattice temperature and limit signal contrast. Here we show that MIR irradiation rebalances dissipative relaxation pathways, driving lanthanide emitters into a non-Boltzmann steady state that enables non-thermal control of population distributions. This allows emission behaviors inaccessible under thermal equilibrium. We exploit this regime to achieve linear MIR detection with respect to MIR power across 6.8 to 8.6 micrometers. The ratiometric response is intrinsically independent of the pump power, enabling operation at an ultralow excitation power of 10 uW, several orders of magnitude lower than conventional approaches. Using standard silicon photodetectors, we then demonstrate room-temperature MIR imaging with detection limits approaching 4 nW um-2. Our results establish lanthanide nanoparticles as an efficient platform for MIR conversion and sensing in nanophotonic systems.

physics.optics

Intracavity THz generation using a thin lithium niobate plate in a compact Kerr-lens mode-locked Yb:CALGO bulk oscillator

We demonstrate intracavity terahertz (THz) generation via optical rectification in a 50-m-thick lithium niobate crystal placed inside a compact diode-pumped Kerr-lens mode-locked (KLM) Yb:CALGO bulk oscillator. The oscillator operates at a repetition rate of 85 MHz and delivers 83-fs pulses with up to 71 W of average intracavity power, obtained with only 21.4 W of low-cost multimode diode pump power. We generate single-cycle THz pulses with a spectrum extending up to 3 THz, detected by electro-optic sampling with 60 dB dynamic range within 156 s of measurement time (313 averaged traces) and up to 120 W of THz average power. This work combines the high damage threshold, power-handling capability, and cost-effectiveness of thin LN plates with simplicity, compactness, and low-cost multimode diode-pumped solid-state bulk lasers, offering an attractive alternative for high-repetition-rate THz time-domain spectroscopy systems.

physics.optics