Nonlinear Raman Shift Induced by Exciton-to-Trion Transformation in Suspended Trilayer MoS2

Hossein Taghinejad; Mohammad Taghinejad; Alexey Tarasov; Meng-Yen Tsai; Amir H. Hosseinnia; Philip M. Campbell; Ali A. Eftekhar; Eric M. Vogel; Ali Adibi

arXiv · 1502.00593

Nonlinear Raman Shift Induced by Exciton-to-Trion Transformation in Suspended Trilayer MoS2

Hossein Taghinejad·Mohammad Taghinejad·Alexey Tarasov·Meng-Yen Tsai·Amir H. Hosseinnia·Philip M. Campbell·Ali A. Eftekhar·Eric M. Vogel·Ali Adibi

View original source ↗Read source document ↗Export metadata ↓

Abstract

Layered two-dimensional (2D) semiconductors such as molybdenum disulfide (MoS2) have recently attracted remarkable attention because of their unique physical properties. Here, we use photoluminescence (PL) and Raman spectroscopy to study the formation of the so- called trions in a synthesized freestanding trilayer MoS2. A trion is a charged quasi-particle formed by adding one electron or hole to a neutral exciton (a bound electron-hole pair). We demonstrate accurate control over the transformation of excitons to trions by tuning the power of the optical pump (laser). Increasing the power of the excitation laser beyond a certain threshold (~ 4 mW) allows modulation of trion-to-exciton PL intensity ratio as well as the spectral linewidth of both trions and excitons. Via a systematic and complementary Raman analysis we disclose a strong coupling between laser induced exciton-to-trion transformation and the characteristic phononic vibrations of MoS2. The onset of such an optical transformation corresponds to the onset of a previously unknown nonlinear Raman shift of the in-plane (E12g) and out-of-plane (A1g) vibrational modes. This coupling directly affects the well-known linear red-shift of the A1g and E12g vibrations due to heating at low laser powers, and changes it to a nonlinear and non-monotonic dependence with a blue-shift in the high laser power regime. Local reduction of the electron density upon exciton-to-trion transformation is found to be the underlying mechanism for the blue-shift at high laser powers. Our findings enrich our knowledge about the strong coupling of photonic and phononic properties in 2D semiconductors, and enable reliable interpretation of PL and Raman spectra in the high laser power regimes.

Explore related subjects

physics.optics cond-mat.mes-hall

Keep this discovery

BibTeX RIS

Hossein Taghinejad, Mohammad Taghinejad, Alexey Tarasov, Meng-Yen Tsai, Amir H. Hosseinnia, Philip M. Campbell, Ali A. Eftekhar, Eric M. Vogel, Ali Adibi. 2015-02-02. Nonlinear Raman Shift Induced by Exciton-to-Trion Transformation in Suspended Trilayer MoS2. https://arxiv.org/abs/1502.00593

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗