arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1410.6066

Landau-Lifshitz-Bloch equation for exchange coupled grains

Christoph Vogler·Claas Abert·Florian Bruckner·Dieter Suess
View original source ↗Read source document ↗Export metadata ↓

Abstract

Heat assisted recording is a promising technique to further increase the storage density in hard disks. Multilayer recording grains with graded Curie temperature is discussed to further assist the write process. Describing the correct magnetization dynamics of these grains, from room temperature to far above the Curie point, during a write process is required for the calculation of bit error rates. We present a coarse grained approach based on the Landau-Lifshitz-Bloch (LLB) equation to model exchange coupled grains with low computational effort. The required temperature dependent material properties such as the zero-field equilibrium magnetization as well as the parallel and normal susceptibilities are obtained by atomistic Landau-Lifshitz-Gilbert (LLG) simulations. Each grain is described with one magnetization vector. In order to mimic the atomistic exchange interaction between the grains a special treatment of the exchange field in the coarse grained approach is presented.

Explore related subjects

physics.comp-phcond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Christoph Vogler, Claas Abert, Florian Bruckner, Dieter Suess. 2014-10-27. Landau-Lifshitz-Bloch equation for exchange coupled grains. https://doi.org/10.1103/physrevb.90.214431

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

AI-Assisted GPU optimization of the Stochastic Variational Method for Few-Body Boson System

The stochastic variational method (SVM) is one of the most powerful methods to solve quantum few-body systems precisely in various fields, such as nuclear and atomic physics. To the best of our knowledge, no SVM code optimized for GPUs has been reported. We developed a parallel SVM code for few-body clusters of $^4$He atoms and optimized it for two GPU architectures, NVIDIA GH200 and AMD Instinct MI300A, with the entire code written by an AI coding agent. On the algorithmic side, we introduce the secular-equation method with the Gu--Eisenstat prescription for solving the generalized eigenvalue problem within the SVM framework. The main part of the code tuning is to batch the many small matrices so that the GPUs are used efficiently, together with an array layout in memory optimized for coalesced addressing. For the five-body system with 4800 SVM basis states, the tuned SVM code runs 16.2 (14.7) times faster on the NVIDIA GH200 (AMD MI300A) than the same tuned code on the Intel Xeon Max CPU system, and 168 (153) times faster than the first working CPU implementation. The achieved performance brings 6-body and larger cluster systems within reach.

physics.comp-ph↗
arXiv2026

Experimental Bench Validation of a Computational Fluid-Structure Interaction Model of Transcatheter Aortic Valve Dynamics

Purpose: This study extends our fluid-structure interaction (FSI) framework for surgical bioprosthetic heart valves in an experimental pulse duplicator to a transcatheter aortic valve replacement (TAVR) device. We assess hemodynamic and leaflet kinematic agreement across pulse rates and the transferability of calibrated boundary-model parameters. Methods: We compared simulated and experimental pressure, volumetric flow rate, projected dynamic valve area (PDVA), and leaflet kinematics at 60, 70, and 80 beats per minute (bpm). Reduced-order boundary-model parameters were calibrated using only data acquired at 70 bpm and were subsequently held fixed. At each pulse rate, a condition-specific pump-pressure waveform was constructed from the measured upstream pressure and flow rate. The 60 and 80 bpm cases therefore evaluate parameter transfer under measurement-informed upstream forcing. Results: Across the three conditions, normalized root-mean-square errors are 2.88-3.08% for aortic flow rate, 7.64-8.07% for upstream ventricular pressure, 3.50-6.21% for downstream aortic pressure, and 3.07-4.70% for PDVA. The simulations reproduce the principal pressure, flow, valve-opening, and valve-closure features. The downstream aortic pressure and PDVA measurements at 60 and 80 bpm were not used to construct the upstream forcing or recalibrate the model parameters and therefore provide the principal out-of-calibration validation evidence. Conclusion: The results provide conditional experimental bench validation evidence for downstream hemodynamics and valve dynamics under measurement-informed upstream forcing and support boundary-parameter transfer across pulse rates without recalibration. This work advances an experimentally supported, high-fidelity FSI framework for evaluating TAVR device performance.

physics.comp-ph↗
arXiv2026

Extension of a multi-region free-surface MHD solver beyond the inductionless approximation

Free-surface liquid metal flows are a leading candidate for the plasma-facing components of future fusion reactors, but existing transient, three-dimensional, free-surface MHD solvers rely on the inductionless approximation, in which the induced magnetic field is neglected. This paper extends the open-source solver FreeMHD [B. Wynne et al., Phys. Plasmas 32, 013907 (2025)] beyond that approximation, resolving the induced field self-consistently with a vector-potential formulation that enforces $\nabla\cdot\boldsymbol{B}=0$ by construction while preserving the original multi-region, two-phase framework. It is verified against the analytical Shercliff and Hunt duct flows, against flows driven by a time-varying applied field, and against the deformation of a free liquid metal jet crossing a non-uniform field, and validated against free-surface height measurements from the LMX-U experiment. The experiment validates the overall free-surface solution rather than finite-$R_m$ effects, which the transient-field cases verify. To our knowledge this is the first open-source, fully three-dimensional free-surface liquid metal solver to resolve the evolution of the induced magnetic field, providing a basis for modeling the finite magnetic Reynolds number conditions expected in large-scale, transient fusion events.

physics.comp-ph↗