arXiv ScienceSearch

arXiv · 1409.4405

LBNO-DEMO: Large-scale neutrino detector demonstrators for phased performance assessment in view of a long-baseline oscillation experiment

Abstract

In June 2012, an Expression of Interest for a long-baseline experiment (LBNO) has been submitted to the CERN SPSC. LBNO considers three types of neutrino detector technologies: a double-phase liquid argon (LAr) TPC and a magnetised iron detector as far detectors. For the near detector, a high-pressure gas TPC embedded in a calorimeter and a magnet is the baseline design. A mandatory milestone is a concrete prototyping effort towards the envisioned large-scale detectors, and an accompanying campaign of measurements aimed at assessing the detector associated systematic errors. The proposed $6\times 6\times 6$m$^3$ DLAr is an industrial prototype of the design discussed in the EoI and scalable to 20 kton or 50~kton. It is to be constructed and operated in a controlled laboratory and surface environment with test beam access, such as the CERN North Area (NA). Its successful operation and full characterisation will be a fundamental milestone, likely opening the path to an underground deployment of larger detectors. The response of the DLAr demonstrator will be measured and understood with an unprecedented precision in a charged particle test beam (0.5-20 GeV/c). The exposure will certify the assumptions and calibrate the response of the detector, and allow to develop and to benchmark sophisticated reconstruction algorithms, such as those of 3-dimensional tracking, particle ID and energy flow in liquid argon. All these steps are fundamental for validating the correctness of the physics performance described in the LBNO EoI.

Explore related subjects

Keep this discovery

BibTeXRIS

L. Agostino, B. Andrieu, R. Asfandiyarov, D. Autiero, O. Bésida, F. Bay, R. Bayes, A. M. Blebea-Apostu, A. Blondel, M. Bogomilov, S. Bolognesi, S. Bordoni, A. Bravar, M. Buizza-Avanzini, F. Cadoux, D. Caiulo, M. Calin, M. Campanelli, C. Cantini, L. Chaussard, D. Chesneanu, N. Colino, P. Crivelli, I. De Bonis, Y. Déclais, J. Dawson, C. De La Taille, P. Del Amo Sanchez, A. Delbart, S. Di Luise, D. Duchesneau, F. Dulucq, J. Dumarchez, I. Efthymiopoulos, S. Emery, T. Enqvist, L. Epprecht, T. Esanu, D. Franco, M. Friend, V. Galymov, A. Gendotti, C. Giganti, I. Gil-Botella, M. C Gomoiu, P. Gorodetzky, A. Haesler, T. Hasegawa, S. Horikawa, M. Ieva, A. Jipa, Y. Karadzhov, I. Karpikov, A. Khotjantsev, A. Korzenev, D. Kryn, Y. Kudenko, P. Kuusiniemi, I. Lazanu, J. -M. Levy, K. Loo, T. Lux, J. Maalampi, R. M. Margineanu, J. Marteau, C. Martin, G. Martin-Chassard, E. Mazzucato, A. Mefodiev, O. Mineev, B. Mitrica, S. Murphy, T. Nakadaira, M. Nessi, K. Nikolics, L. Nita, E. Noah, P. Novella, G. A. Nuijten, T. Ovsiannikova, C. Palomares, T. Patzak, E. Pennacchio, L. Periale, H. Pessard, B. Popov, M. Ravonel, M. Rayner, C. Regenfus, C. Ristea, O. Ristea, A. Robert, A. Rubbia, K. Sakashita, F. Sanchez, R. Santorelli, E. Scantamburlo, F. Sergiampietri, D. Sgalaberna, M. Slupecki. 2014-09-14. LBNO-DEMO: Large-scale neutrino detector demonstrators for phased performance assessment in view of a long-baseline oscillation experiment. https://arxiv.org/abs/1409.4405

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det