arXiv ScienceSearch

arXiv · 1303.1437

Dark signal correction for a lukecold frame transfer CCD. Application to the SODISM solar telescope on board the PICARD space mission

Abstract

When Charge Coupled Devices are used for scientific observations, their dark signal is a hindrance. In their pristine state, most CCD pixels are `cool'; they exhibit low, quasi uniform dark current, which can be estimated and corrected for. In space, after having been hit by an energetic particle, pixels can turn `hot'. They start delivering excessive, less predictable, dark current. The hot pixels need therefore to be flagged so that subsequent analysis may ignore them. The image data of the PICARD SODISM solar telescope (Meftah et al. 2013) require dark signal correction and hot pixel identification. Its frame transfer E2V 42-80 CCD operates at -7{\deg}C. Both image and memory zones thus accumulate dark current during, respectively, integration and readout time. These two components must be separated to estimate the dark signal for any observation. This is the purpose of the Dark Signal Model presented in this paper. The dark signal time series of every pixel is processed by the Unbalanced Haar Technique (Fryzlewicz 2007) in order to timestamp when its dark signal is expected to change. In-between those instants, both components are assumed constant and a robust linear regression vs. integration time provides first estimates and a quality coefficient. The latter serves to assign definitive estimates. Our model is part of the SODISM Level 1 data production scheme. To check its reliability, we verify on dark frames that it leaves a negligible residual bias (5 e-), and generates a small RMS error (25 e- rms). The cool pixel level is found to be 4 e-/pxl/s, in agreement with the predicted value. The emergence rate of hot pixels is investigated too. It legitimates a threshold criterion at 50 e-/pxl/s. The growth rate is found to be 4% of the frame area per year. Aspects of the method (adaptation of the Unbalanced Haar Technique, dedicated robust linear regression) have a generic interest.

Explore related subjects

Keep this discovery

BibTeXRIS

J. -F. Hochedez, C. Timmermans, A. Hauchecorne, M. Meftah. 2013-03-06. Dark signal correction for a lukecold frame transfer CCD. Application to the SODISM solar telescope on board the PICARD space mission. https://doi.org/10.1051/0004-6361/201321607

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM