arXiv ScienceSearch

arXiv · 1204.0600

A Jumping Cylinder on an Incline

Abstract

The problem of a cylinder of mass m and radius r, with its center of mass out of the cylinder axis, rolling on an incline that makes an angle with respect to the horizontal is analyzed. The equation of motion is partially solved to obtain the site where the cylinder loses contact with the incline (jumps). Several simplifications are made: the analyzed system consists of an homogeneous disc with a one dimensional straight line of mass parallel to the disc axis at a distance y < r of the center of the cylinder. To compare our results with experimental data, we use a Styrofoam cylinder to which a long brass rod was imbibed parallel to the disc axis at a distance y < r from it, so the center of mass lies at a distance d from the center of the cylinder. Then the disc rolls without slipping on a long wooden ramp inclined at 15, 30 and 45 degrees with respect to the horizontal. To determine the jumping site, the motion was recorded with a high-speed video camera (Casio EX ZR100) at 200 and 480 frames per second. The experimental results agree well with the theoretical predictions.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R. W. Gómez, J. J. Hernández-Gómez, V. Marquina. 2012-04-03. A Jumping Cylinder on an Incline. https://doi.org/10.1088/0143-0807%2F33%2F5%2F1359

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Understanding Quaternions and the Dirac Belt Trick

The Dirac belt trick is often employed in physics classrooms to show that a $2π$ rotation is not topologically equivalent to the absence of rotation whereas a $4π$ rotation is, mirroring a key property of quaternions and their isomorphic cousins, spinors. The belt trick can leave the student wondering if a real understanding of quaternions and spinors has been achieved, or if the trick is just an amusing analogy. The goal of this paper is to demystify the belt trick and to show that it implies an underlying \emph{four-dimensional} parameter space for rotations that is simply connected. An investigation into the geometry of this four-dimensional space leads directly to the system of quaternions, and to an interpretation of three-dimensional vectors as the generators of rotations in this larger four-dimensional world. The paper also shows why quaternions are the natural extension of complex numbers to four dimensions. The level of the paper is suitable for undergraduate students of physics.

physics.pop-ph

Project Setu: 3D Multi-Physics Design and Scaled Structural Analysis for a Relativistic Lightsail Architecture

Deep-space exploration beyond the solar system requires eliminating chemical propellant mass penalties to achieve relativistic flight velocities (0.166c at 180 s, reaching the mission target of 0.20c at 227 s). This study presents a 3D multi-physics numerical framework for a 4.0-meter circular lightsail propelled by a 100 GW ground laser array, coupling 3D Maxwell FDTD wave optics, non-linear membrane mechanics, and Stefan-Boltzmann thermal radiation in ANSYS Mechanical APDL and Ansys Lumerical. A four-level grid convergence study establishes numerical independence with an ASME GCI_21 of 0.13%, resolving peak membrane stresses of 530.88 MPa with a 3.77x safety factor against stoichiometric Si3N4 tensile failure. With optical absorption constrained to 10 ppm (A = 1.0 x 10^-5), the steady-state core temperature stabilizes at 923.02 K (0.44% deviation from radiation theory), maintaining a +1,247 K margin below sublimation, while fundamental drumhead modal resonance (7.92 Hz) provides a 7.92x safety buffer against laser jitter. The electrodynamic radiation pressure formulation is cross-verified against published flight telemetry from JAXA IKAROS and NASA LightSail 2 within 0.12% and 2.13%, confirming classical momentum transfer modeling across solar and beamed propulsion regimes.

physics.pop-ph

Sunsets, tall buildings and the Earth's radius

It is shown how repeated observations of the sunset from various points up a tall building can be used to determine the Earth's radius. The same observations can also be used, at some latitudes, to deduce an approximate value for the amount of atmospheric refraction at the horizon.

physics.pop-ph