Liquid Atomization out of a Full Cone Pressure Swirl Nozzle

Nicolas Rimbert; Guillaume Castanet

Home/Archive/arXiv

arXiv · 1008.2474

Liquid Atomization out of a Full Cone Pressure Swirl Nozzle

Nicolas Rimbert·Guillaume Castanet

View original source ↗Read source document ↗Export metadata ↓

Abstract

A thorough numerical, theoretical and experimental investigation of the liquid atomization in a full cone pressure swirl nozzle is presented. The first part is devoted to the study of the inner flow. CAD and CFD software are used in order to determine the most important parameters of the flow at the exit of nozzle. An important conclusion is the existence of two flow regions: one in relatively slow motion (the boundary layer) and a second nearly in solid rotation at a very high angular rate (about 100 000 rad/s) with a thickness of about 4/5th of the nozzle section. Then, a theoretical and experimental analysis of the flow outside the nozzle is carried out. In the theoretical section, the size of the biggest drops is successfully compared to results stemming from linear instability theory. However, it is also shown that this theory cannot explain the occurrence of small drops observed in the stability domain whose size are close to the Kolmogorov and Taylor turbulent length scale. A Phase Doppler Particle Analyser (PDPA) is used to characterize the droplet size and velocity distribution. Due to centrifugal force, the smaller droplets tend to prevail on the spray axis and a peak close to the Taylor length scale appears progressively in the PDF when increasing the distance from the nozzle. It is then assumed that these small droplets are the results of a turbulent cascading atomization process and that in the near nozzle area, since centrifugal segregation is small, PDF can therefore be fitted with a log-stable law (Rimbert and Séro-Guillaume, 2004). The value of the stability index is found to be 1.35 very close to a previous experimental result of 1.39 (Rimbert and Delconte, 2007) but far from a known theoretical value of 1.70 (Rimbert, 2010). This let think about a slightly different underlying process due to the helical nature of the turbulence.

Explore related subjects

physics.flu-dyn physics.class-ph

Keep this discovery

BibTeX RIS

Nicolas Rimbert, Guillaume Castanet. 2010-08-14. Liquid Atomization out of a Full Cone Pressure Swirl Nozzle. https://arxiv.org/abs/1008.2474

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗